DigiPurge Digital Timer Purge Kit for SandMaster and ILB Separators

Cannon Water Technology Inc.

$699.00
(No reviews yet) Write a Review
SKU:
DIGIPURGE-075
Weight:
7.00 LBS
Shipping:
Free Shipping
Adding to cart… The item has been added

DigiPurge

Digital Timer Controlled Purge Controller with 3/4" Motorized ball Valve

The DigiPurge system automates purging of sand from the Lakos SandMaster Plus and ILB Series sand separators. 

This system is plug and play offering several modes of operation to choose from.

Set timer to activate on any schedule you prefer.

Optional: Connect a water meter and only purge when a specified amount of water has passed through the system. Two timers in one device, use the second timer for another device like chemical feed pumps. 

Nanotron F2 Digital Timer Controller

  • Two independent timers that run off any of the available modes
  • Multiple Timer Modes to include:
    • Pulse Timer Accepts dry contact pulsed from aa water meter (supplied separately) Accumulate 1 - 9999 pulses to activate the timer to run from 0-99 minutes.
    • Recycle Timer - User defined "Off" Cycle in HH:MM and user defined "On" Cycle in MM:SS that is repeated constantly.
    • 28 Day Timer - 28 day cycle with two independent programmable cycles allowing for activation on selectable days and weeks. 
    • Batch Timer - Activated by the Force On/Off Button for a user defined run time. 
    • Utility - Relay is on as long as it is not in an alarm state. Use for emergency shut off. 
    • After Timer 1 - This allows Timer 2 to run after Timer 1 completes a cycle. 
  • Two Water Meter Inputs
  • Force On button to test or activate for user defined amount of time.
  • Flow switch input. Use to enable or disable output based on flow.
  • Two drum low level inputs to act as an alarm input and disable timer. 

KLD Motorized Ball Valve with Actuator, Junction Box and Power Cord

Plug in the power cord to Timer 1 and connect ball valve to the SandMaster or ILB separator purge connection.

Low Maintenance Cost In Mind: All ball valves will eventually leak due to sand and grit damaging the ball valve. Leaking will occur! Replacement of the ball valve over time is a part of regular maintenance. Other purging systems will have to be re-purchased when only the ball needs to be replaced. This can be very expensive over time. Cannon Water Technology Offers a $99.00 ball valve replacement program for owners of the DigiPurge-075 System. This significantly reduces the cost of ownership. 

 

Warranty:

2 years on controller

90 days on KLD075 motorized ball valve.

After 90 days a once per year replacement valve and actuator can be purchased for $99.00 each.