Walchem
Walchem
Walchem Chemical Metering Pump Model: EWB11F1-VC, 0.6 GPH, 150 PSI, 115V
Discontinued Pump. See EWN Series.
The EW Series is the flagship of the E-Class with capacities up to 6.7 GPH (25.4 l/h) and a maximum pressure of 250 PSI (17 bar). Compact, powerful and packed with a variety of innovative design features the EW can enhance any feed application.
IP65 Construction
The rugged Polyphenylene Oxide (PPO) enclosure is equipped with a durable clear cover to protect the membrane switches and stroke control of the pump, which are mounted opposite the liquid end. The display utilizes a high temperature LCD that provides extra protection from sunlight in outdoor applications.
Control Features
-
Feed Accuracy - Powered by the E-Class 360 Stroke-Per-Minute technology the EW has an incredible adjustment range of 1800:1 ensuring precise feed control for any application.
-
Analog Input Control - Fixed or scalable 4-20MA input control.
-
Pulse Input Control - Pulse input with multiply and divide features (1-9999). 12VDC output power supply for Hall Effect water meters.
-
Stop Input Control - A stop input contact will stop pump operation and close the stop output relay contact for external control, alarm or remote notification. A red LED locally indicates a stopped condition.
-
Pre-Stop Input - A pre-stop input contact will illuminate an orange LED, locally providing warning while pump continues to operate.
-
Feed Verification - The EW is equipped with 3-preprogrammed modes for accepting our Posiflow Feed Verification Sensor. The Posiflow provides a pulse feedback to the pump to verify prime and proper feed. Depending on the mode, the user can program to pump to stop, continue operating and/or send an alarm based on the Posiflow input.
-
Outputs - A stop condition and synchronous pulse outputs are standard outputs, however the output relays can be programmed to signal any pump condition.
-
Easy Draw-Down Calibration - In the calibration mode the user only needs to start and stop the pump, enter the draw-down volume and the pump calibrates volume-per-stroke.
EW - Electronic metering pump with external pulse control or manual speed control (adjustable to 360 strokes per minute) and manually adjustable stroke length. (Turndown ratio 1800:1.)
Capacity/Pressure Rating
B11 = (0.6 GPH / 38mL/min, 150 PSI, 3/8" O.D)
B11-H = (0.3 GPH / 21mL/min, 250 PSI, 3/8"suc x 1/4"dis)
B16 = (1.0 GPH / 65mL/min, 105 PSI, 3/8" O.D)
B21 = (1.8 GPH / 115mL/min, 60 PSI, 3/8" O.D)
B31 = (3.3 GPH / 210mL/min, 30 PSI, 1/2" O.D)
C16 = (1.3 GPH / 80mL/min, 150 PSI, 3/8" O.D)
C16-H = (0.6 GPH / 40mL/min, 250 PSI, 3/8"suc x 1/4"dis)
C21 = (2.3 GPH / 145mL/min, 105 PSI, 3/8" O.D)
C31 = (4.3 GPH / 270mL/min, 50 PSI, 1/2" O.D)
Control Module
F - For use on all EW models, features digitally adjustable speed and external pulse
input control, stop & pre-stop inputs
Y - For use on all EW models, features analog input, digital input & divide, PosiFlow input and alarm outputs.
Voltage
-
1 115 VAC, 50/60 Hz
-
2 230 VAC, 50/60 Hz
Liquid End
Liquid End Code | Pump Head & Fittings | Diaphragm | Valve Balls | Valve Seat | Valve Seals | Gasket | Tubing |
PC | GFRPP | PTFE (bonded to EPDM) | CE | FKM | FKM | PTFE Customers Also Viewed |