There are no products listed under this category.
The Serfilco line of acid waste lift stations are designed to pump corrosive chemicals and acids. These vertical pump lift stations come in many sizes and configurations to include simplex pump lift stations and duplex pump lift stations. We can customize these to your specifications. The table below is a list of the standard configurations.
Acid waste lift stations
Please contact us for a detailed quote.
Vertical Lift Station Pumps are constructed of CPVC, mounted on a thick PVC tank cover (1/2", 3/4" or 1", depending on model). PVC cover plate is bolted down to the tank with 304SS bolts. Vertical lift pumps are independently mounted to the CPS cover via their own mounting plate. This allows for "drop in" service or replacement. Tanks are molded rigid HDPE, eliminating leakage. Tank is provided with 1.5" or 2" NPT inlet fitting installed near top of side. Motors are chemical duty, TEFC and are rated continuous duty at either 50 Hz or 60 Hz
Motors for EO4 pumps and smaller (1.0 HP) are single phase and are supplied with 8 ft. line cord with molded plug. Motors for EO5 pumps and larger are three phase.
Level controls are state-of-the-art electronic conductivity type with 316SS probes or float sensors for non-conductive solutions. The level control relay is mounted in a watertight (IP54) PVC enclosure which includes on/off switch with indicating light.
- pH sensor
- ORP sensor
- Solenoid Valve
- Basket strainer
- High level alarm
- Chemical waste lift station
- Under sink lift pump
- Chemical duty lift pump
- Chemical sump pump
- Acid sump pump
- Acid waste lift station
- Corrosive chemical lift pump
- Lab sink waste pump
- Vertical chemical pump
Call for quote: 1 916 315-2691
Compare the Serfilco acid waste lift stations to similar models like Herco Lift and Wastech Controls & Engineering Vertical Pump Lift Station.
Handles corrosive media unlike Liberty Pumps, Zoeller and Goulds submersible pumps.