Blog

Low water pressure is one of the main problems faced in many homes and commercial facilities. In fact, if it is overlooked, the water pressure may just gradually drop till the time you can barely wash your hands well or even take a shower. Therefore, this problem may seem like nothing at first but with time it can be real trouble. This is why you must act on it as soon as possible. What is the solution? Well, this post gives you insights about ways of improving your water pressure.

Step by Step Guidelines to Improve Water Pressure

In order to resolve the problem of low water pressure, you need to analyze, identify the cause, and act on the solution. For this thorough process, you should follow the steps detailed below.

Step 1: Analyze the Intensity of Problem

It is true that the problem of low water pressure certainly exists. However, it is important to know the intensity of the water pressure. To know it, you need to test it yourself.

• Check the Water Pressure: The easiest way to check water pressure is to check your water meter. If your water meter shows reduced water pressure, then you need to analyze it further. You can use pressure gauges or pressure sensors to check the actual water pressure. These devices can simply be attached to the water line faucets. After the installation of pressure gauges or sensors, you must start the water supply and check pressure at different locations in the pipeline. If the pressure at different points is fluctuating, then there is a real problem that needs to be identified and addressed immediately. You must install good quality pressure regulators to ensure sufficient water pressure in the pipeline. Generally, for domestic applications, the pressure regulators receive 100psi water pressure from the mainline. The regulator then drops it to 80 psi for pipeline and at the tap, you get 50 psi. Any pressure below 50 psi is dropped water pressure. However, it is important to shut any devices that are connected to the waterline, in order to avoid damage.

Step 2: Cause Identification:

Drop in water pressure can be due to reasons like clogged pipelines, filters, defective pressure valves, and many things that can cause a drop in water pressure.

• Check Pressure Valves for Problem Identification: The main valve can be a cause of water pressure drop. Sometimes during routine repair and maintenance, the operator may leave the main pressure valve open or partially shut. This mistake can cause air trapping in the valves. Trapped air creates air bubbles, which get trapped in the valve entrance. Therefore, you must check the valve for any defect.
• Faucet and Fixture Inspection: The faucets and fixtures are susceptible to pressure changes. These fixtures and faucets generally get clogged if any foreign material is trapped inside. The filters mostly get clogged and become oily which causes clogged faucets. Rusting is another common problem in pipeline faucets and fittings. Therefore, you shall check if the faucets, fittings, and pipe bends are clean or not.

Step 3: Problem Resolution:

Once the cause of the problem is detected, then it is time for the problem resolution. The following are ways to resolve the water pressure drop problem.

• Clean the Clogged Pipes: If there is no leakage in the pipes, you can simply clean the pipes. Removing clogs can considerably increase the water pressure. You can try pipe cleaning chemical mixes or you can mix some baking soda and vinegar to pour it inside the pipes. It burns the trapped material and cleans the pipe.
• Replace the pipes, valves, and fittings: If you find any leakages in the pipe, then either you can fix it with temporarily gluing solutions or you can replace the whole pipe and fittings to avoid future problems.
• Install Water Softening System: Installation of a water softening system can be a suitable choice to avoid further clogging. Generally, hard water corrodes the pipeline causing leakage and clogging. It may also build upscaling on the inner walls of the pipe, this can drop water pressure. Therefore, to resolve the problem, you must invest in water softening systems.

Now that you know how to improve the water pressure, you must also consider buying quality products. Poor quality products will only make the problem worst. Therefore, you must buy products like valves and pipe fittings, pressure regulators, water meters, and peristaltic pumps from a trusted supplier. Cannon water technology, Inc is a supplier of excellent water solution products. Their products can certainly add safety to your water supply system. All these products are sourced from industry-leading brands.