Lakewood Instruments

FTG,CPVC,SENSOR-5R OPTION

This Reed Switch Assembly Comes With 36 Inches Of Cable For Use With Flow Switch Plumbing Assemblies That Are Attached To The Lakewood Instruments Controller Enclosures Or On A Mounting Plate.

FTG,CPVC,SENSOR-5I OPTION

The 4 Electrode Cooling Tower Conductivity Sensor With 30 Inches Of Cable For Use With The Models 224C, 1400, 2175, 2412, 2430, NCKT, and NexSys® on a mounting plate

The PL5 1/2 inch cycle sample plumbing is used as a cycle sample method in boilers. The orifice restricts flow near the boiler sensor to prevent steam flashing during a sample. The PL6 can also be...

The PL675 3/4 inch continuous plumbing is used for a continuous sampling of a boiler. The lower orifice bleeds a small sample across the sensor. The upper orifice is used with the motorized ball...

The PL6 1/2 inch continuous plumbing is used for a continuous sampling of a boiler. The lower orifice bleeds a small sample across the sensor. The upper orifice is used with the motorized ball valve...

pH Replacement Sensor Tip Shown 5205-STD with BNC Connector (specify length when ordering)

SENSOR,TIP,PH,5207-STD,SS

FTG,316SS,SENSOR-7I OPTION

FTG,316SS,SENSOR-7R OPTION

Corrosion coupons are one of the simplest and lowest cost tools used to determine average corrosion rates in a cooling water system. Corrosion coupons are small bars of metal or alloys that are...

The 9102 Is A PVC Inlet Plumbing Assembly With Brass Shut-Off Valve And A Sample- Cock. The Material Is PVC Schedule 80 With Brass Valves. The Pressure Rating Is 140 Psi At 100°F (9.7 Bar @...

The 9160 Is A Corporation Stop That Will Effectively Disperse Chemicals Such As Acid In The Center Of A Pipe. Process And Chemical Inlet Connections Are 1 Inch NPT. The Quill Diameter Is ½...

The 9160 Is A Corporation Stop That Will Effectively Disperse Chemicals Such As Acid In The Center Of A Pipe. Process And Chemical Inlet Connections Are 1 Inch NPT. The Quill Diameter Is ½...

The 9176 Injection Manifold Is Designed For Use With Four (4) Chemical Injection Points Including Acid. A Sample Valve, Shut Off Valve, And Quick Release Unions Are Included For Easy Removal. The...

Corrosion coupons are one of the simplest and lowest cost tools used to determine average corrosion rates in a cooling water system. Corrosion coupons are small bars of metal or alloys that are...

The Lakewood Instruments Drum Level Switch Can Be Used As Either A High Or A Low Level Indicator. Applications Chemical Drum Monitor Waste Water Tank Level Can Be Used With The NexSys® Series ...

The GV is a 1/2 inch NPT Globe Valve with position indicator and is used for throttling or metering the flow restriction near the boiler sensor to prevent steam flashing.

CABLE,BOILER SENSOR,20FT CABLE