The JLP® series is tested and certified to NSF/ANSI 372 for lead free compliance. This no lead meter is designed for aggressive water such as reverse osmosis and de-ionized. When long life, low maintenance and high accuracy are needed in a plastic totalizing or pulse out water meter, Carlon’s JLP® plastic meters are what you want. The JLP series comes in four sizes, ½”, ¾”, 1” and 1½” and operates at flow rates from ¼ GPM to 50 GPM and pressure up to 100 psi.
Carlon meters are designed in accordance with AWWA specifications and come with dry sealed registers and flow indicators.
Specifications
- Meter Housing: Engineered reinforced plastic (nylon).
- Connections: Plastic threaded connections are provided with all JLP® Meter orders.
- Reed Switch: Dry contact type, normally open, 24V, 10mA maximum
- Pressure Rating: Maximum 100 psi.
- Temperature Range: 35° - 122°F. Protect the meter from freezing.
- PH Level Range: 6.5 – 8.0
- Accuracy: +/- 1.5% of maximum flow when operating between minimum and maximum flow range.
- Register Options: U.S. Gallons, Cubic Feet and Liters
Installation Instructions
- Flush the line thoroughly after all plumbing changes to prevent contaminates from entering the meter.
- Install horizontally with the register facing up and inlet port facing the water supply line.
- For outdoor installation, protect meter from direct exposure to the elements.
- Protect meter from backflow of water opposite of indicted flow direction.
Downloads
JLP/JLPRS Datasheet
JLP/JLPRS Manual
