CARLON Model SSMR® Stainless Steel Series Water Meter, 2" With Remote Display

When you need a No-Lead Water Meter with a Digital Remote, the SSMR® series is just the one. The result is an accurate, compact, and reliable remote system. The remote display matches the amount shown on the meter register. This Multi-Jet Meter has long life and good tolerance to contaminants.

The SSMR® meter is available in sizes from 5/8” x 1/2" to 2” with maximum flow rates up to 160 GPM and pressures up to 150 psi. Registrations are available in gallons, cubic feet, or liters/cubic meters.

The SSMR® meter is tested and certified to NSF/ANSI 372 for lead free compliance and meets or exceeds AWWA specifications.

Specifications

• Pressure Rating: Maximum 150 psi.
• Temperature Range: 35° - 122°F. Protect the meter from freezing.
• PH Level Range: 6.5 – 8.0
• Accuracy: +/- 1.5% of maximum flow when operating between minimum and maximum flow range.
• Register Options: U.S. Gallons, Cubic Feet and Liters.
• Remote Counter Housing: NEMA-4 (UV protected stabilized ABS plastic)
• Remote Counter Dimensions: Height 4¾”, Width 3”, Depth 1”
• Remote Counter Display: UV Protected Liquid Crystal, 8 digit, .315” high
• Remote Input: Reed Switch or Capacity Discharge Generated Pulses.

Installation Instructions

1. Flush the line thoroughly after all plumbing changes to prevent contaminates from entering the meter.
2. Install horizontally with the register facing up and inlet port facing the water supply line.
3. For outdoor installation, protect meter from direct exposure to the elements.
4. Protect meter from backflow of water opposite of indicted flow direction.

Downloads

SSMR Datasheet

SSMR Manual