Cable extension kit, with aluminum junction box with terminal strip, cable gland

KIT07 – For ML110/MV110, to transform the instrument from compact to separate version.

KIT04 - For MV2xx Converters - separation kit for transformation of the instrument from COMPACT to SEPARATE (including the resin to fill the sensor neck)

CO15/CO16 Cables for connection of an MS series sensor to the MV210 will provide better electrical noise immunity and stronger signal for low conductivity applications when using longer cable lengths

CO15/CO16 Cables for connection of an MS series sensor to the MV210 will provide better electrical noise immunity and stronger signal for low conductivity applications when using longer cable lengths

CO14 Cables for connection of an MS series sensor to the MV110 converter or MV2XX with preamplifier

CO14 Cables for connection of an MS series sensor to the MV110 converter or MV2XX with preamplifier

USB Mini-B Cable for use MCP software and MV Series Converters and CS Series Compact Meters.

ISOMAG MV155 DATALOGGER WITH CELLULAR COMMUNICATIONS Thanks to its shape and reinforced PA6 Nylon housing, the MV155 can be installed outdoors or in aggressive environments always providing NEMA6 protection. The MV155 can be configured with different...

ML4-F1 High Speed Batching Converter for ISOMAG Flow Sensors Designed for demanding rapid-filling. batching and dispensing applications. The high-speed ML4-F1 Converter is compatible with a wide variety of flow sensors. The stainless steel ML4-F1 shown...

MV255 Battery Powered Converter with Cellular Communications Battery powered converters compatible with ISOMAG flow sensors. The MV255 FLOWIZ is a battery or AC powered converter compatible with ISOMAG flow sensors. The MV255 converter can be powered...

FLOMOTION MV210 electromagnetic flow meter converter suitable for connection to all ISOMAG® sensors The new high power MV210 converter is designed for applications in water, wastewater and other industrial markets. High power coil excitation means...

MV145 Battery Powered Converter Battery powered converters compatible with ISOMAG flow sensors. Features Accuracy: ± 0.2% of the reading Programmable through keypad on front panel or via PC connected through a USB cable adapter Flexible mounting...

FLOMOTION MV110 electromagnetic flow meter converter suitable for connection to all ISOMAG® sensors The new MV110 converter is designed for applications in water, wastewater and other industrial markets where basic measurement requirements or output...

ISOMAG CS8100 Compact Electromagnetic Flow meter Includes built-in converter. High measurement stability and repeatability Measures are not affected by changes in Viscosity / Temperature / Pressure Low installation costs Built-in display Pulse or 4-20mA...

ISOMAG MS5000 Electromagnetic Flow meterThe MS5000 Flowmeter combines reliable full-pipe flow measurement with high accuracy, low cost and ease of installation. Several converters for control and interfacing are available for this flow sensor...

ISOMAG CS3900 Small Diameter Insertion Electromagnetic Flow meterCombines reliable full-pipe flow measurement with high accuracy, low-cost and ease of installation, even in pressurized lines. Features  CONVERTER Power 10-30VDC (1W) Interface: 5 Pin...

ISOMAG CS3820 Compact Battery Powered Insertion Electromagnetic FlowmeterCombines reliable full-pipe flow measurement with high accuracy, low-cost and ease of installation. Features Integral converter Power: 2 Lithium Batteries Greater than 15 year...

ISOMAG MS3810 Hot-Tap Insertion Electromagnetic Flow Sensor Combines reliable full-pipe flow measurement with high accuracy, low-cost and ease of installation, even in pressurized lines. Several converters for control and interfacing are available for...

ISOMAG MS3795 Insertion Electromagnetic Flow Sensor Combines reliable full-pipe flow measurement with high accuracy, low-cost and ease of installation. Features CONVERTER Power 10-30VDC (1W) Interface: 5 Pin connector with plug or cable. One...