- The Eddington QCBM & QCFM Injection Quills offer MNPT process connections and 1/2" FNPT pump side connections. Quills made from Type 316 Stainless Steel, Alloy 20, Hastelloy C276 can be used for high temperature, high pressure applications.
- We test all of our quills for a crack pressure of 10 psi. If the pump cannot deliver 10 psi then a QBFM injection quill may be appropriate.
- Quills are available in Type 316 Stainless Steel, PVC, Kynar, Alloy 20 and Hastelloy C276.
- The QCBM has no check valve and the QCFM Injection Quills have built-in ball check valves to prevent backflow through the nozzle and into the chemical feed line.
- There are two flat surfaces on the external portion of the nozzle so a wrench can be used during installation.
- Install Injection Quill with V notch facing into the flow for the most rapid dispersal of injected chemicals into the stream (see diagram above).
- Standard Injection Quill length is 2 3/4" but custom lengths up to 24" are available. For additional lengths,
please add the desired length after the part number. (e.g. QCFM-316-050-18)
Downloads
QCFM Series Injection Quills Datasheet
Call For Addintional Length:
PVC Models: $158.00 – 24” Max Length
316 SS Models: $164.00 – 24” Max Length
Kynar Models: $164.00 – 24” Max Length
Slotted Quill End: Add $70.00
For longer Alloy 20 & Hastelloy quill lengths, consult factory for pricing
