MV145 Battery Powered Converter
Battery powered converters compatible with ISOMAG flow sensors.
Features
- Accuracy: ± 0.2% of the reading
- Programmable through keypad on front panel or via PC connected through a USB cable adapter
- Flexible mounting so that display can be seen from the top or from the front
- Galvanic separation: all inputs and outputs are separated from each other and from the power supply
- Protection rating: NEMA 6 (IP 67) IP68 on request
- Compatible with any Isomag® flow sensor
- Low flow rate cut-off
- Bidirectional measurement
- Batching functions
- Empty pipe detection
- Alarm limits
- Large back-lit LCD display with protective cover
Available accessories:
- Rechargeable backup battery (assures the measurement in case of power loss)
- 4 GB data logger
- Built-in Verificator (BIV) for verifying electrical characteristics of the sensor
Available Communications:
- Hart or Modbus RTU protocol
- RS485 communications
- One or two 4-20mA outputs
- Two (2) pulse/frequency open collector outputs
- One (1) digital open collector input
Specifications
- Accuracy to ±0.1% of rate
- 4-20mA or Frequency Output Accuracy ±0.2%
- Ambient Temperature
-4 to 140ºF (Aluminum Housing)
-4 to 104ºF (Nylon Housing)
- Humidity Range: 0-100%
- Environmental Rating:
NEMA 6p / IP68
- Fluid Conductivity: 20 µS (min, compact mount)
- Power Supply Options: 12-48VDC or 100-240 VAC.
44-66Hz 1.5w sensor only, 4w all loads., Battery:
40mw sensor only, 200mW all loads
- Alkaline, Lithium or NiMh battery options
- 4-20mA output maximum load: 1000Ω
- Inputs/outputs are galvanically isolated from power supply up to 500 V
- USB MINI B cable required for PC programming
- Values stored in memory in case of power failure
- Graphic display 128x64 pixels w/back light (Main power version only)
- 3 external programming keys
- Digital Outputs, Max 32 Hz, 100mA, 30 V (AC/DC)
- MicroSD Memory Card 4 - 32 GBytes
- Cable glands - PG11
Downloads
MV145 Datasheet
MV145 Operation Manual
