ISOMAG MS1000 Wafer Style Electromagnetic Flow Sensor

No reviews yet

SKU: MS1000

Weight: 2.70 LBS

Call For Quote 1 (916) 315-2691

Checkout securely with:

ISOMAG MS1000 Wafer Style Electromagnetic Flow Sensor

The MS1000 Flowmeter combines reliable full-pipe flow measurement with high accuracy, low cost and ease of installation.

Several converters for control and interfacing are available for this flow sensor.

Features

Accuracy to +/-0.2%
Lower cost than flanged units.
Twelve sizes from 1/2″ to 16″ Pipe Diameters.
Flow ranges from 0.85 to 19,934 GPM.
Pressure: 230 psi (PP or Ebonite Liner), 580 PSI (PTFE Liner).
Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
No moving parts for zero maintenance.
Bi-directional flow measurement.
No pressure drop through sensor.
Standard integral ground electrode.
Minimal straight pipe run required.
Every sensor is factory wet-calibrated.Accuracy to +/-0.4%

Dimensions

Specifications

Repeatability: ±0.1%
Temperature (Liquid)
+32 to 140°F (PP)
+23 to 175°F (Ebonite)
-4 to 212°F (PTFE Compact)
-4 to 302°F (PTFE Remote)
Pressure:
PP or Ebonite Liner: 230 PSI (Std.)
PTFE Liner: 230 PSI (Std.)
PTFE Liner: 580 PSI (optional, up to 6” Diameter)
Liner Material: PTFE, Ebonite or Polypropylene
Flow Tube: 304 S.S.
Body Material: Carbon steel with two-part epoxy coating (S.S. optional)
Electrode Material: 316 S.S.*
Number of Electrodes: 3
Environmental Rating: NEMA 6
Fluid Conductivity: 5 μS/cm (min)
Connections: Wafer tightened between flanges