Lakewood Instruments Autotrol Turbine Water Meters

Autotrol Turbine Water Meters:

Best for use with clean water—perfect for make-up water totalization.  These turbine meters are accurate, cost-effective, and easily replaceable.  Available in 1” and 2”, configuration on a Lakewood controller requires nothing more than selecting the size, thanks to pre-programmed flow curves.

• 3023532 – 1″ Turbine Meter with 1″ NPT SS Adapter
• 3023536 – 2″ Turbine Meter with 2″ NPT SS Adapter
• 1033354 – 25′ Hall Effect sensor cable
• 1033355 – 50′ Hall Effect sensor cable

Here are some of the technical details for Autotrol meters:

• Flow rate range: 0.275 to 35 gpm (1″ meter) or 5 to 250 gpm (2″ meter)
• Housing: 30% glass-filled polyphenylene oxide
• Turbine/impeller:  polypropylene
• Bearings: polyimide (1″ meter) or carbon graphite (2″ meter)
• Shaft: 302SS (1″ meter) or no shaft/thrust bearing (2″ meter)
• Accuracy: +/- 3%
• Pressure drop: 1.5 psi @ 30 gpm (1″ meter)
• Pressure drop:  2.5 psi@ 150gpm (2″ meter)
• Max water temperature: 100F / 38C
• Available cable lengths: 25 foot (part 1033354) & 50 foot (part 1033355)