Neptune FC-1P-P-N1 Flow Checker

Feed Verification

Model FC-1 Flow Checker

The Model FC-1 Flow Checker output provides vital information for watertreatment programs requiring feed verification to manage chemistry and monitor drum inventory

• The flow checker mounts directly to the discharge of PZ, PWM, PWP and PWT metering pumps.
• The flow checker is an oval gear flow meter which measures the pump output and transmits one pulse for each 1 ml of flow.
• Connect the flow checker output to your controller or PLC (external power supply required).

† Not available for larger models

Liquid-End Materials

* Ryton: PPS — Polyphenylene-sulfide (for general chemicals)
** Noryl: PPO — Polyphenylene-oxide (for sodium hypochlorite)

Specifications

• Pulse constant: 1mL/pulse
• Accuracy: ±3% (Depends on nature of chemical, flow rate, temperature and back pressure.)
• Normal operating pressure: 140 psi (10 Kg/cm2)
• Momentary maximum operating pressure: 200 psi (14 Kg/cm2)
• Temperature: 32°F–104°F (0°C–40°C) (Liquid should not freeze.)
• Liquid viscosity: 1 to 50 cps
• Output: Open collector (Collector capacity: 30V, 30mA)
• Power requirement: 4.5 to 25VDC (20mA Max.)*

Green LED lights for each pulse output. Red LED on when the power is ON

NOTES:

1. Use flow checker only for clear liquids.
2. Pressure loss is 0.5 Kg/cm2 (at maximum flow rate using water).
* + 5V Power Supply provided on board PZi8 Models.