SeaMetrics Cold Water Meters MJ Series: Bronze Body (Not Compliant with CA or VT codes for potable water)

SeaMetrics Cold Water Meters MJ Series: Bronze Body (Not Compliant with CA or VT codes for potable water)

Name: SeaMetrics Cold Water Meters MJ Series: Bronze Body (Not Compliant with CA or VT codes for potable water)
Brand: SeaMetrics
SKU: MJ-Series
Availability: OutOfStock

No reviews yet

Write a Review

SKU: MJ-Series

Weight: 9.00 LBS

Call For Quote 1 (916) 315-2691

Current Stock:

Description
Product Reviews

Description

If you need NSF Meters use the MJN SERIES CLICK HERE

Not Compliant with California Health & Safety Code Section 116875 (AB1953) or Vermont Act No. 193 for Human Consumption Applications

For a compliant meter See Link:

SeaMetrics MJ Series: Contacting head water meters with dry-contact or solid state pickups.

Designed for metering pump pacing or water treatment control
Hot or cold water models
Rugged epoxy-coated bronze bodies with union ends
Mechanical register
Reed switch (MJR) or Hall-effect (MJE) output
100:1 turndown
Wide range of field-changeable pulse rates
True dry-top construction

GENERAL INFORMATION
use the multi-jet principle, which has been an internationally-accepted standard for many years. This type of meter is known for its wide range, simplicity, and accuracy in low-quality water. Seametrics offers cold or hot water models. The impeller is centered in a ring of jets, with inlet jets on one level and outlet jets on another. A gear train drives the register totalizer dials. For pulse output, one of the pointers is replaced by a magnet, which is detected by an encapsulated sensor attached to the outside of the lens. Pulse rate is determined by the dial on which the magnet is placed, and by the number of sensors (single or double).

Changing the pulse rate requires no special tools and can be done in the field.

Mechanically, all MJ-Series meters are the same. The difference among *MJE/MJHE, *MJR/MJHR and *MJT/MJHT meters is in the sensor. MJE/MJHE meters use a solid-state, long-lasting Hall-effect sensor, which requires power. It is suited for use with Seametrics controls and metering pumps (LMI for instance) that have sensor power. MJR/MJHR meters use a two-wire reed switch. They provide a dry contact closure and do not require power. MJT/MJHT meters totalize only and do not have a sensor.