Knight Equipment

Knight Equipment Peracetic Acid Resistant Tubing.This pump tube has been specifically selected to hold up better than other tubing material when exposed to peracetic acid. This PAA pump tube is used...

KNIGHT Equipment Bulk Pump Tubing T-50T, Thermistant  Bulk Roll: Sold By The Foot      

Knight Equipment T-38V Tube 3/8" OD X 1/4" ID x 6ft Length Vinyl Tubing (7025842)

Knight Equipment T-86T Thermistant, 20" length, 1/2" ID (.48 x .86 OD) squeeze tube (KP-900) (7018107) Dimensions: ID 12.2 x Wall 4.8 x OD 21.8 mmRoller Block Compatibility: RB-986The Santoprene...

Knight Equipment T-66T Thermistant Tube 3/8" ID X 14" Cut Length (KP-800B) (7018105) Dimensions: ID 8.9 x Wall 3.4 x OD 15.7 mmRoller Block Compatibiity: RB-550, RB-850The Santoprene based tube is...

Knight Equipment Check Valve Assembly, 1/4" MNPT x 1/4" barb, Sani Clean III (1600741)

Knight Equipment T50F Fluoro Viton Tube, 1/4" ID x 12.5" Cut (KP-500) (7018089) Part Number: 7018186Dimensions: ID 6.4 x Wall 3.4 x OD 13.2 mmRoller Block Compatibility: RB-550, RB-850A Fluoro-Viton...

Knight T-53T Thermistant Squeeze Tube 11 in 3/16 in. I.D. (KP-500) Part Number: 7018096Dimensions: ID 4.7 x Wall 4.1 x OD 13.0 mmRoller Block Compatibility: RB-553The Santoprene based tube is...

Knight Equipment T50F Viton Tube, 1/4" ID x 9" Cut (KP-500) (7018086) Part Number: 7018186Dimensions: ID 6.4 x Wall 3.4 x OD 13.2 mmRoller Block Compatibility: RB-550, RB-850A Fluoro-Viton material...

Knight Equipment T-50M (KP-800) Medical Grade Silicone Tube 1/4"ID x 14" (7018002)

Knight Equipment T-50M Medical Grade Silicone Tube 1/4"ID x 11" (7018001)

Knight Tube Assy T-66EP or EPDM  w/ 3/8" barb and push connector 10.5" Tube length Barb and connector make the assy longer. Used for 800 Series pump OP Elite

Knight Equipment T-50T Thermistant Tube, 11" Cut   Fits KP-500 Size Pump Heads Performs very well with strong oxidizers like chlorine.  Used on most of the Knight Dish Machines

Knight Equipment Pump Tube T-50EP Plus The EP Plus are Enhanced Tubes which are Longer Lasting and will Hold UP Better over other EPDM Pump Tubes.  This EPDM tube is compatible with weak to...

Knight Solid Sink Bowl For Solid or Powder Capsule Pot and Pan Detergent Dispenser with Water Control Valve and Vacuum Breaker 

Knight Equipment Squeeze Tube For Peristaltic Pumps P/N 7018068 T-66E Elastic Tube, .35" I.D., .62" O.D. 14" Long Fits KP-500 and KP-800 Series Pumps With Appropriate Roller Blocks.  Use...

  Knight Equipment Squeeze Tube For Peristaltic Pumps P/N 7028662 T-86E Elastic Tube, .49" I.D., .86" O.D. 20" Long Fits KP-900 Series Pumps Use with roller block RB-986

  Knight Equipment Tube Lube, 2 oz.  Use this lubricant to on Knight peristaltic pump tubes to maximize life and minimize friction. 

  Knight Equipment T-53E Elastic Pump Tube 11" Long .19 ID x .13 Wall x .51 Diameter  Fits 500 Series Pumps with RB-553 Roller Block      

  Knight Equipment Pump Tube T-50E. This EPDM tube is compatible with weak to strog corrosive solutions including: Alkalis, Builders, Breaks, Surfactants, Detergents, Chlorine, Iron Sours, Weak...