Replacement Parts

The PL5 1/2 inch cycle sample plumbing is used as a cycle sample method in boilers. The orifice restricts flow near the boiler sensor to prevent steam flashing during a sample. The PL6 can also be...

The PL675 3/4 inch continuous plumbing is used for a continuous sampling of a boiler. The lower orifice bleeds a small sample across the sensor. The upper orifice is used with the motorized ball...

The PL6 1/2 inch continuous plumbing is used for a continuous sampling of a boiler. The lower orifice bleeds a small sample across the sensor. The upper orifice is used with the motorized ball valve...

The GV is a 1/2 inch NPT Globe Valve with position indicator and is used for throttling or metering the flow restriction near the boiler sensor to prevent steam flashing.

CABLE,BOILER SENSOR,20FT CABLE

The 4 ELECTRODE BOILER SENSOR can be in the boiler blowdown line or with a sample cooler. The Boiler Sensor 4 Electrode can only be used with the 2250 and 2250e. Specifications Body: 316 SS ...

The SR4, 4 electrode sensor with 20 foot cable. The SR4 can be in the boiler blowdown line or with a sample cooler. The SR4 can only be used with the model 2250 AND 2250e. Specifications Body: 316...

The PL575 3/4 inch cycle sample plumbing is used as a cycle sample method in boilers. The orifice restricts flow near the boiler sensor to prevent steam flashing during a sample. The PL675 can also...

The SR2N, 2 electrode sensor with 20 foot cable and conductivity node. The SR2N is used for monitoring conductivity in a boiler blowdown line. The SR2N cannot be used after a sample cooler. For model...

4 electrode sensor, 20 ft cable, conductivity node(For NexSys® only)

Used to monitor conductivity in a boiler blowdown line where a harsh or high amine environment exists; cannot be used after a sample cooler HD sensor Conduit elbow, 20′ cable 316 SS Body 416 SS...

The ½” PLKT plumbing kit can be used for sample / cycle and continuous sample kit. Includes unions, orifice plates, cross, tee, and a manual block valve only. The PLKT plumbing kit does not inc

2 electrode harsh duty sensor, 20 ft cable, conductivity node(For NexSys® only)

VALVE,BALL,1/2",REPLACEMENT,MBV1

VALVE,BALL,3/4",REPLACEMENT,MBV2

ACTUATOR, REPLACEMENT,MBV

The SR2, 2 electrode sensor with conduit elbow, 20 foot cable, and ¾” cross. The SR2 is used for monitoring conductivity in a boiler blowdown line. The SR2 cannot be used after a sample cooler...

The GVN is a 1/2 inch NPT Globe Valve without a position indicator and is used for throttling or metering the flow restriction near the boiler sensor to prevent steam flashing.