Accessories & Replacement Parts

Echopod, Model DL10-00

Echopod, Model DL10-00, w/ FOB

This Reed Switch Assembly Comes With 20 Feet Of Cable For Use With Flow Switch Plumbing Assemblies That Are NOT Attached To The Lakewood Instruments Controller Enclosure.

This Reed Switch Assembly Comes With 36 Inches Of Cable For Use With Flow Switch Plumbing Assemblies That Are Attached To The Lakewood Instruments Controller Enclosures Or On A Mounting Plate.

The 4 Electrode Cooling Tower Conductivity Sensor With 30 Inches Of Cable For Use With The Models 224C, 1400, 2175, 2412, 2430, NCKT, and NexSys® on a mounting plate

The Lakewood Instruments Drum Level Switch Can Be Used As Either A High Or A Low Level Indicator. Applications Chemical Drum Monitor Waste Water Tank Level Can Be Used With The NexSys® Series Can Be Used With The 1500 Series Features Normally...

4 Electrode Conductivity With 4ft body and 20ft cable

4 electrodes and 20 feet of cable  For use with the following models: 2175e, 2412e, 2430e, 2175-N4, 2412-N4, 2430-N4, 2812e, 2830e, 2832e, 2875e, and NexSys®.

This Replacement Plumbing Assembly Is Designed For 3/4 Inch Solvent Weld Connections. Used With Lakewood Instruments Cooling Tower Conductivity Sensors.

The Remote Input RTD Is Used where Extreme Variations in Water Temperature Cause Inaccurate Conductivity Readings. The RTD Is 500 Ohm NTC. Can Be Used with The Models 101, 111, 151, 161, 140, 173, 175, 211, 215, 412, 420, 1400, 1575, 1575e, 2175, 2412,...

The pH / ORP simulator is used to simulate pH or ORP input to a controller. The simulator is powered by a 9v battery and comes with a coaxial cable with BNC Connectors.

The Replacement Plumbing Assembly Comes With Flow Sight, Float, Reed Switch, And 3/4 Inch NPT Connections. For Use With The Model 1512e, 2412e, 2430e, and NexSys® Cooling Tower Controllers. 

The Replacement Plumbing Assembly Comes With Flow Sight, Float, Reed Switch, And 3/4 Inch NPT Connections. For Use With The Model 2832e and NexSys® Cooling Tower Controllers.

The EZ Service Kit includes: a flow sight, a float, spare fuses, O-rings, O-lube, tie wraps, spade lugs, a small screwdriver, a wire brush, pH simulator shunts, conductivity test terminal blocks for cooling tower controllers, and instructions for use,...

LUBRICANT PACK, SILICON,SET OF 10

ASSY,FLO-TEKTOR,5V,20'CABLE The FLO-TEKTOR, formerly called the SPAD, is used as an alternative or as a backup to a mechanical flow switch. It is designed to detect the operation of external equipment, such as a recirculation pump. This allows the...

ASSY,FLO-TEKTOR,24V,20'CABLE

ASSY,FLO-TEKTOR,5V,50'CABLE The FLO-TEKTOR, formerly called the SPAD, is used as an alternative or as a backup to a mechanical flow switch. It is designed to detect the operation of external equipment, such as a recirculation pump. This allows the...

ASSY,FLO-TEKTOR,24V,50'CABLE The FLO-TEKTOR, formerly called the SPAD, is used as an alternative or as a backup to a mechanical flow switch. It is designed to detect the operation of external equipment, such as a recirculation pump. This allows the...

The Replacement Plumbing Assembly Comes With Flow Sight, Float, Reed Switch, And 3/4 Inch NPT Connections. For Use With The Model 2000e and NexSys® Cooling Tower Controllers.