Good water quality plays an important role in improving the health and productivity of livestock and poultry. It also helps protect and extend the life of water supply equipment. The Econ Integrator™ Meter System is designed to inject commonly used chemicals directly into the water line without dilution. This allows farms to treat water effectively while ensuring the pump operates safely and reliably.
Econ Integrator Meter Systems Key Features:
- Pump operating times are digitally adjusted from 0.1 to 60 seconds in 1% increments.
- The solutions are contained in the tube and in suction/discharge lines so they do not touch the moving parts in the pump.
- Equipped with a safety lockout feature and a standby mode.
- Standby mode allows tube replacement in the pump head without disconnecting the power and/or the lead wires
- It is self-priming and doesn’t lose prime due to off-gassing solutions.
Technical Data / Specification:
- Output Control: Six button control panel with LCD display
- Reproducibility: +/- 2%
- Maximum Working Pressure: 80 psi (5.5 bar)
- Maximum Operating Temperature: 104°F (40°C)
- Maximum Suction Lift: 25 ft (7.6 m) vertical lift, based on water
- Motor Type: 24VDC, brushless
- Shaft RPM (average maximum): 60
- Duty Cycle: Continuous
- Motor Voltage: 120V 60Hz (0.25A); 230V 60Hz (0.17A); 24VDC (0.85A)
- Power Cord Type: 120V 60Hz, 230V 60HZ SJTOW; 24VDC pigtail
- Power Cord Plug End: 120V 60Hz NEMA 5-15P; 230V 60Hz NEMA 6015P; 24VDC pigtail
- Power Cord Length: 6 ft (1.9 m); 10 ft (3.05 m); 24VDC pigtail 1 ft (30.5 cm)
- Classification: Indoor/Outdoor
Materials of Construction:
- All Housings: Polycarbonate
- Pump Tube & Check Valve Duckbill: Santoprene®* (FDA approved)
- Pump Head Rollers: Polyethylene
- Suction/Discharge Line, Ferrules: Polyethylene (FDA approved)
- Tube & Injection Fittings: PVC or Polypropylene (both NSF listed)
- Connecting Nuts: PVC or Polypropylene (both NSF listed)
- Suction Line Strainer & Cap: PVC or Polypropylene (both NSF listed)
- All Fasteners: Stainless steel