Stenner ECON Timer Series Pumps

Stenner Econ Programmable timer activated peristaltic metering pump provides a 24-event control capability with an integral timer in a compact pump for light duty applications requiring a dosing schedule.

The system allows up to 24 individually programmable ON/OFF cycles over a 7-day schedule. Each cycle can run for as little as 1 minute or as long as 23 hours and 59 minutes, with precise adjustments available by the hour and minute. The LCD control panel includes a 24-hour programmable clock supported by a battery backup, ensuring that all timing and event data remain intact during power interruptions. The display provides clear indicators for the day of the week, operating status, and event sequence. While operating, it shows the current day, time, and active mode. Additionally, the timer activated peristaltic metering pump is available in a 24VDC configuration for locations where standard line voltage is not accessible.

Sidebar Sidebar Sidebar
  • Stenner ECON Timer Metering Pump

    Stenner

    Stenner ECON Timer Metering Pump, 80 PSI, E20T4

    ZK7,071.80 - ZK8,726.16
    Programmable timer 24 hr/7 day, 24 event timer Enclosed housing Self-priming, does not lose prime or vapor lock Pumps off-gassing solutions and can run dry 3-point roller design assists with anti-siphon Tube replacement without tools Output...
    ZK7,071.80 - ZK8,726.16

    Quick Add
  • Stenner ECON Timer Series Metering Pump

    Stenner

    Stenner ECON Timer Series Metering Pump, E10T2

    ZK5,486.86 - ZK8,726.16
    Programmable timer 24 hr/7 day, 24 event timer Enclosed housing Self-priming, does not lose prime or vapor lock Pumps off-gassing solutions and can run dry 3-point roller design assists with anti-siphon Tube replacement without tools Output...
    ZK5,486.86 - ZK8,726.16

    Quick Add
  • Stenner ECON Timer Series Metering Pump

    Stenner

    Stenner ECON Timer Series Metering Pump, E10T1

    ZK5,486.86 - ZK8,726.16
    Programmable timer 24 hr/7 day, 24 event timer Enclosed housing Self-priming, does not lose prime or vapor lock Pumps off-gassing solutions and can run dry 3-point roller design assists with anti-siphon Tube replacement without tools Output...
    ZK5,486.86 - ZK8,726.16

    Quick Add
Compare 0

Technical Specifications:

  • Flow Rate Output Control: 24-hr programmable clock; 7 day, 24 event timer
  • Reproducibility: ±5%
  • Maximum Working Pressure: 25 psi (1.7 bar), 80 psi (5.5)
  • Maximum Operating Temperature: 104°F (40°C)
  • Maximum Suction Lift: 25 ft (7.6 m) vertical lift, based on water
  • Motor Type: 24VDC, brushed
  • Shaft RPM (average maximum): 9, 18 or 40
  • Duty Cycle: Continuous
  • Motor Voltage: 120V 60Hz (0.25A), 230V 60Hz (0.17A), 230V 50Hz (10W), 24VDC (0.5A)
  • Power Cord Type: 120V 60Hz, 230V 60Hz: SJTOW, 230V 50Hz: H05RN-F, 24VDC pigtail
  • Power Cord Plug End: 120V 60Hz NEMA 5-15P, 230V 60Hz NEMA 6-15P, 230V 50Hz CEE7/7, 24VDC pigtail
  • Power Cord Length: 6 ft (1.8 m), 10 ft (3.05 m) or 24VDC Pigtail 1 ft (30.5 cm)
  • Classification: Indoor/Outdoor

Features / Highlights:

  • Programmable timer 24 hr/7 day, 24 event timer
  • Enclosed housing
  • Self-priming, does not lose prime or vapor lock
  • Pumps off-gassing solutions and can run dry
  • 3-point roller design assists with anti-siphon
  • Tube replacement without tools
  • Output reproducibility
  • Tube lubrication not required
  • Foot valve not required to prime
  • Output volume not affected by back pressure
  • Tubes and pump heads interchangeable between models
  • Installation accessories included

Applications:

  • Enzyme injection in drain line in commercial kitchens to avoid costly visits from grease trap clearing companies.
  • Biocide feed for Legionella prevention in small cooling towers
  • Sanitation for water fountains
  • Injection of liquid solar blankets or enzymes in swimming pools