Additionally, the pump can be configured with three output relays, allowing it to respond automatically to selected operating conditions.
Key Features:
- Leak detection
- Backup pump capability
- Three output relays
- Tube change timer
- Enclosed housing, NEMA 4X
- Modbus RTU over RS-485 capable
Technical Specifications:
- Flow Rate Output Control: Varies per control mode; digital keypad
- Reproducibility: +/- 2%
- Maximum Working Pressure: 25 psi (1.7 bar), 100 psi (6.9 bar)
- Maximum Operating Temperature: 104°F (40°C)
- Maximum Suction Lift: 25 ft (7.6 m) vertical lift, based on water
- Motor Type: Brushless DC motor
- Shaft RPM (average maximum): 45
- Duty Cycle: Continuous
- Maximum Viscosity: 1500 Centipoise
- Motor Voltage (Amp Draw): 120V 60Hz 1PH (0.6); 230V 60Hz 1PH (0.3); 230V 50Hz 1PH (0.3)
- Hall Effect Max. Input Frequency: 100 KHz
- Pulse Duration Required: 10 milliseconds (minimum duration required for pump to read signal)
- Power Cord Type: 120V 60Hz SJTOWA; 230V 60Hz SJTOWA; 230V 50Hz H05RN-F
- Power Cord Plug End: 120V 60Hz 5-15P; 230V 60Hz 6-15P; 230V 50Hz CEE7/7
- Cord Length: 6 ft (1.8 m)
- Classification: Indoor/Outdoor