CARLON JLPRS® PLASTIC METERS, 3/4" X 1"

The JLP® series is tested and certified to NSF/ANSI 372 for lead free compliance. This no lead meter is designed for aggressive water such as reverse osmosis and de-ionized. When long life, low maintenance and high accuracy are needed in a plastic totalizing or pulse out water meter, Carlon’s JLP® plastic meters are what you want. The JLP series comes in four sizes, ½”, ¾”, 1” and 1½” and operates at flow rates from ¼ GPM to 50 GPM and pressure up to 100 psi.

Carlon meters are designed in accordance with AWWA specifications and come with dry sealed registers and flow indicators.

Specifications

• Meter Housing: Engineered reinforced plastic (nylon).
• Connections: Plastic threaded connections are provided with all JLP® Meter orders.
• Reed Switch: Dry contact type, normally open, 24V, 10mA maximum
• Pressure Rating: Maximum 100 psi.
• Temperature Range: 35° - 122°F. Protect the meter from freezing.
• PH Level Range: 6.5 – 8.0
• Accuracy: +/- 1.5% of maximum flow when operating between minimum and maximum flow range.
• Register Options: U.S. Gallons, Cubic Feet and Liters

Installation Instructions

1. Flush the line thoroughly after all plumbing changes to prevent contaminates from entering the meter.
2. Install horizontally with the register facing up and inlet port facing the water supply line.
3. For outdoor installation, protect meter from direct exposure to the elements.
4. Protect meter from backflow of water opposite of indicted flow direction.

Downloads

JLP/JLPRS Datasheet

JLP/JLPRS Manual