CARLON Model SJM® Series Single Jet Meter

The SJM® single jet series meter is tested and certified to NSF/ANSI 372 for lead free compliance. This robust meter is suitable for reverse osmosis, deionized, hot (160ºF), or cold water. The SJM® meter can handle up to 232 psi and the sealed register has the ability to rotate 360º. The meter has an integral strainer and is offered in gallons or liters.

The SJM® meter is designed in accordance with AWWA, C712-10 specifications and comes with a magnetic drive and dry sealed register to assure clear reading. The wet and dry side of the meter are separated and the magnetic coupling is shielded for protection from external magnetic fields.

The SJM® meter comes with a reed switch for signaling controllers or remote readers.

Specifications

• Meter Housing: Engineered reinforced plastic (nylon). Meets AWWA C712-10 standards.
• Magnetic Drive: Shielded for magnetic field protection.
• Register: Dry Dial to assure clear reading. Register can rotate 360º.
• Integral Strainer: Molded into the body.
• Connections: Plastic threaded connections and gaskets are provided.
• Reed Switch: Dry contact type, normally open, 24V, 10mA maximum
• Pressure Rating: Maximum 232 psi.
• Temperature Range: 35° - 160°F. Protect the meter from freezing.
• PH Level Range: 6.5 – 8.0
• Accuracy: +/- 2.0% of maximum flow.
• Register Options: U.S. Gallons and Liters

Installation Instructions

1. Flush the line thoroughly after all plumbing changes to prevent contaminates from entering the meter.
2. Install horizontally with the register facing up and inlet port facing the water supply line.
3. Meter should be full of water at all times during operation.
4. For outdoor installation, protect meter from direct exposure to the elements.
5. Protect meter from backflow of water opposite of indicted flow direction.

Downloads

SJM Datasheet