CARLON Model SSM® Stainless Steel Series Water Meter, 5/8" X 3/4"

The SSM® series have stainless steel meter bodies, tested and certified to NSF/ANSI 372 for lead-free compliance and meet or exceed AWWA specifications. The SSM® Multi-Jet series meters have a long meter life and good tolerance to contaminants. The series is well suited for industrial, commercial and residential applications. The dry sealed registers are easy to read and will retain their clear view display. The SSM® series meter is available in sizes from ⅝” x ½" to 2” with maximum flow rates up to 160 GPM and pressures up to 150 psi. Registrations are available in gallons, liters or cubic feet.

The SSM® meter is a totalizing multi-jet meter for those applications that only need to read the totalized flow at the meter. The SSMRS® meter is equipped with a reed switch for a dry contact pulse output and the SSMR®meter includes a reed switch for a dry contact pulse output and our A31UR Universal Remote® counter.

Specifications

• Reed Switch: Dry contact type, normally open, 24V, 10mA maximum
• Pressure Rating: Maximum 150 psi.
• Temperature Range: 35° - 122°F. Protect the meter from freezing.
• PH Level Range: 6.5 – 8.0
• Accuracy: +/- 1.5% of maximum flow when operating between minimum and maximum flow range.
• Register Options: U.S. Gallons, Cubic Feet and Liters

Installation Instructions

1. Flush the line thoroughly after all plumbing changes to prevent contaminates from entering the meter.
2. Install horizontally with the register facing up and inlet port facing the water supply line.
3. For outdoor installation, protect meter from direct exposure to the elements.
4. Protect meter from backflow of water opposite of indicted flow direction.

Downloads

SSM & SSMRS Datasheet

SSM & SSMRS Manual