FLOMOTION MV110 electromagnetic flow meter converter

FLOMOTION MV110 electromagnetic flow meter converter suitable for connection to all ISOMAG® sensors

The new MV110 converter is designed for applications in water, wastewater and other industrial markets where basic measurement requirements or output protocols are required.

• Accuracy: ± 0.4% of the reading
• Repeatability: ± 0.2%
• Programmable through keypad on front panel or via PC connected through mini USB cable adapter
• Flexible mounting so that display can be seen from the top or from the front
• Galvanic separation: all inputs and outputs are separated from each other and from the power supply 
• Housing material: Nylon reinforced with 15% fiberglass, or Aluminum
• Protection rating: NEMA 6 (IP 67) IP68 on request

Standard features:

• Compatible with any Isomag® flow sensor
• Low flow rate cut-off
• Bidirectional measurement
• Peak cut-off
• Empty pipe detection
• Alarm limits
• Large back-lit LCD display with protective cover

Available accessories:

• Rechargeable backup battery (assures the measurement in case of power loss)
• 4 GB data logger
• Built-in Verificator (BIV) for verifying electrical characteristics of the sensor

Available communications

• Hart or Modbus RTU protocol
• RS485 communications
• One or two 4-20mA outputs
• Two (2) pulse/frequency open collector outputs
• One (1) digital open collector input

Dimensions

Specifications

• Accuracy to ±0.4% of rate
• Repeatability: ± 0.2%
• Ambient Temperature
  -4 to 140ºF (Aluminum Housing)
  -4 to 104ºF (Nylon Housing)
• Humidity Range: 0-100%
• Environmental Rating:
  NEMA 6 / IP67
• Fluid Conductivity: 5 µS (min, compact mount)
• Power Supply Options: 12-48VDC or 100-240 VAC.
  44-66Hz. 1.5w sensor only, 5w all loads.
• 4-20mA output maximum load: 1000Ω, 24VDC.
• Inputs/outputs are galvanically isolated from power supply up to 250 V
• USB cable type A/USB MINI B required for PC programming
• Values stored in memory in case of power failure
• Graphic display 128x64 pixels w/back light
• 3 external programming keys
• Digital Outputs, 1250 Hz, 100mA, 30 Vdc (max)
• MicroSD Memory Card

Downloads

MV110 Datasheet

MV110 Operation Manual

MV110 MODBUS Manual

MV110 HART Manual

MV110 M-BUS Manual