IP803 Series 316 SS Insertion Paddlewheel Meters (FT430 Meter Mount)

SeaMetrics

$1,228.00 - $1,546.00
(No reviews yet) Write a Review
SKU:
IP803S
Weight:
1.00 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

The IP800-Series are impeller (or “paddlewheel”) insertion meters designed for use with a wide variety of clean liquids in pipe sizes 1/2” to 8”. Sensors are available in brass, 316 stainless steel, PVC, and polypropylene. Bodies are machined from a solid rod for maximum precision. Highquality jewel bearings and nickel-bound tungsten carbide shafts are used for extreme low friction and long life. The rotation of the rotor is detected by a non-drag Hall-effect sensor. Output is a current-sinking pulse, which can be sent long distances (up to 2,000 feet) without a transmitter. This signal can be connected directly to PLC’s, counters, and computer cards, as well as a variety of Seametrics controls and displays. For rate and total display, a modular system of electronics can be installed directly on the flow sensor or mounted remotely. The FT430 (externally powered with pulse), FT440 (loop powered), and FT450 (battery powered) all provide digital rate and total displays, as well as a programmable pulse; the FT440 also provides a 4-20 mA analog output. Electronic modules can be wall- or meter- mounted. If no display is required, a simple divider may be needed, such as the PD10 to provide adjustable pump pacing. The IP800-Series require special fittings that ensure correct depth placement in the pipe. Fittings come in a variety of materials for compatibility with specific applications. Tee fittings are individually wetcalibrated at the factory and marked with the K-factor (pulses per gallon). Saddle fittings must be field-installed on the pipe and do not come wet calibrated. K-factors for saddles are based on factory-testing.

 

 

Features

  • Low-friction, long-life jewel bearings
  • One moving part
  • Fully field-repairable
  • Choice of materials for compatibility with a variety of chemicals
  • Fits 1/2” to 8” pipe
  • Fixed depth in fitting ensures proper placement in pipe
  • Data logger (optional)
  • Sensus smart output (optional with display)