ISOMAG MS3795 Insertion Electromagnetic Flow Sensor

Combines reliable full-pipe flow measurement with high accuracy, low-cost and ease of installation.

Features

CONVERTER

• Power 10-30VDC (1W)
• Interface: 5 Pin connector with plug or cable.
• One input/Output pulse/alarm
• Eeprom program storage
• 4-20mA Output (opt)
• Additional digital output (opt)
• Rugged 304 stainless steel enclosure
• Programmed via laptop

SENSOR

• Accuracy to ±2% of rate from 1 to 33 ft/sec.
• Three sizes for up to 80” Pipe Diameters
• Standard pressure: 235 PSI
• Installs through standard 1” NPT connection
• Can be removed and reinstalled in nonpressurized lines
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature
• No moving parts for zero maintenance
• Bi-directional flow measurement
• Every sensor is factory wet-calibrated

Dimensions

Specifications

• Accuracy: 2.0%
• Repeatability: ±0.5%
• Temperature (Process): 14 to 212ºF
• Pressure: 232 PSI
• Environmental Rating: NEMA 6 (IP67)
• Fluid Conductivity: 20 μS/cm (min)
• Sensor material: PEEK / FPM Electrodes in SS.
• Process Connection: 1” threaded end

Downloads

CS3795 Datasheet

CS3795 Operation Manual