Knight Equipment Faucet Plus Sink Adapter Kit

The Knight Equipment Faucet Plus is the most effective yet simple way to connect your Knight chemical proportioner commercial kitchen sink. The Faucet Plus includes all the components required to plumb tempered Fisher, T & S or Chicago faucet head. Follow these simple installation procedures to supply water
chemical proportioner.

Fits:  Sink adapter kit For Chicago, T&S, and Fisher faucets and many other off brands. In some cases an adapter fitting may be needed to complete the installation found at most plumbing supply outlets. 

INSTALLATION
(1) Disconnect faucet head from sink top.
(2) Connect appropriate faucet connector to male thread of sink top placing rubber washer
connector and male pipe thread on sink. Use plumbing tape on all joints.
(3) Turn the tee on to the male end of faucet connector. Tighten as required.
(4) Turn the ball valve (female end) on to the tee until tight.
(5) Insert and tighten matching faucet connector to the ball valve.
(6) Re-attach faucet head to connector and tighten as required.
(7) Attach blunt end of High Pressure Hose to 1/2” barb and secure with hose clamp.
(8) Attach 3/4” garden hose connector to proportioner inlet fitting.
(9) Turn on water valves and ball valve to allow water flow to proportioner and check for leaks.