Knight UMP Digital Plus 300D 7418300-02 Warewash Dispenser with 2 Liquid Feed Pump and 1 Dry Detergent Solenoid

UMP Digital 300D Warewash Dispenser with 2 liquid feed pump and 1 dry chemical solenoid

The Knight UMP Digital is a state-of-the-art ware wash chemical feed and control system for commercial dish washing machines that has a well proven history of durability and reliability. This next generation of UMP Digital offers Inductive Probe capability, allowing the UMP Digital to operate in probe mode with increased reliability and accuracy without issues due to hard water or corrosive chemicals. You can dramatically reduce service time and offer accurate control for bottom line cost savings.

Electrical Features - 

• Auto-switching power supply (90 - 270v)
• Signal voltage capacity 24 – 480v
• 7 Conductor signal/power wire attached (15 ft.)
• Probe wire attached (12 ft.)
• On/off rocker switch underside of case
• Low level sensor connections (3 products)
• Volume control for alarms
• Display color changes to red in alarm mode
• Auto-switch from probe to probe-less when probe is fouled or faulted.
• Conductive probe included
• Inductive probe option (hard water areas)
• Easy to connect optional rinse switch if signals are not easily available.
  

Programming Features - 

• Multiple languages (English, Spanish French, German, Dutch, and Italian)
• Programmable Digital password
• Ability to edit display of company name and phone number
• Resettable rack counter
• Squeeze tube life counter alarm
• Change wash water alarm
• Enable/disable user prime
• 5 Digit Rack Counter
  

Note: We highly recommend upgrading this controller with the inductive probe that offers unmatched reliability and performance. 

Inductive Probe Option:

The Inductive Probe is the newest innovation in recent history. When it comes to reliable conductivity measurement and dossing of detergent and oxidizing sanitizing chemicals the Inductive Probe can't be matched. This probe is not hindered by fouling caused by scale deposits, dirt, debris, oils or grease that cause standard conductive probes to fail. The Inductive probe does not need to be regularly cleaned like standard probes which reduces maintenance and ensures efficient chemical feed and reduced operational cost to run the dish machine. 

Optional:

Inductive Probe P/N 1600709

Standard:

Conductive Probe (Comes with the UMP Digital as standard equipment)

Included: One liquid detergent peristaltic pump and one rinse system peristaltic pump, one transformer and installation kit in a watertight plastic case

UMP Digital Plus Product Sheet

UMP Digital Plus Instruction Manuals