Lakewood 1167214 Cooling Tower Plumbing Tee Assembly

This Replacement Plumbing Assembly Is Designed For 3/4 Inch Solvent Weld Connections. Used With Lakewood Instruments Cooling Tower Conductivity Sensors.

NexSys Boiler and Cooling Tower Water Treatment Controller Overview Each unit can control up to 2 cooling towers or up to 4 boilers simultaneously – lowering your capital cost for the entire site...

The 9102 Is A PVC Inlet Plumbing Assembly With Brass Shut-Off Valve And A Sample- Cock. The Material Is PVC Schedule 80 With Brass Valves. The Pressure Rating Is 140 Psi At 100°F (9.7 Bar @ 38°C)...

Prices Shown Are Published List Prices Call For Best Price

Overview Accurately controls boiler and cooling tower conductivity. A standard secondary input may be used to control ORP or pH. Easy to program with an intuitive menu to configure for either...

The PL6 1/2 inch continuous plumbing is used for a continuous sampling of a boiler. The lower orifice bleeds a small sample across the sensor. The upper orifice is used with the motorized ball valve...

The PL675 3/4 inch continuous plumbing is used for a continuous sampling of a boiler. The lower orifice bleeds a small sample across the sensor. The upper orifice is used with the motorized ball...

4 Electrode Conductivity With 4ft body and 20ft cable

The Model 1575e is a microprocessor based, menu driven, water treatment controller designed for use in cooling towers, chill loops, boilers and condensate systems. The Model 1575e provides for...