Checkout securely with:
Parker polyethylene (PE) tubing is produced from a high molecular weight resin to provide increased dimensional stability, uniformity and long-term strength. Parker PE tubing meets the FDA and NSF-51 requirements for food contact applications and NSF-61 for potable water.
The tubing may be used in general-purpose instrument applications as well as all food handling applications except holding food during cooking. The black tubing, EB series, contains an ultraviolet inhibitor which is recommended for use in sunlit areas and in close proximity to high, ultraviolet light sources.
Standard black is not approved for food handling applications, but NSF-listed and FDA-compliant black can be ordered on special request. A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur.
Markets
• Water Market
• Food & Beverage
• Fluid Handling
• Industrial Pneumatics
• Chemical transfer
Features
• Made from 100% virgin resin material for long term strength
• ASTM D-1693 (10% IGEPAL) For excellent stress crack resistance maximizes the service life
• UV stabilized to reduce fading, cracking and loss of strength from sunlight
• Meets FDA, NSF-51 requirements for food contact applications and NSF-61 for potable water
Applications:
• Potable water
• Beverage dispensers
• Chemical transfer
• Low pressure pneumatics
Certifications/Compliance:
• FDA compliant for food contact
• ASTM D-1693 (10% IGEPAL) for stress crack resistance
• NSF – 51 (E series)
• NSF – 61
Technical Specifications:
• Qualified with Parker Fluid System Connectors Division (See PFD Catalog CAT. 4660 of FSC Catalog CAT3501E USA for specific fittings)
• Opaque colors are available in black, blue, gray, green, orange, purple, red, white and yellow
• E series natural and colored tubing meet FDA, NSF-51 requirements for food contact applications and NSF-61 for potable water
• Black (EB) tubing contains an ultraviolet inhibitor which is recommended for use in sunlit areas and in close proximity to high ultraviolet light source
• Black (EB) is not NSF approved
• The recommended operating temperature range for service at rated pressures with compatible fluids is -80°F (-62°C) to +150°F (+66°C)
• A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure
• Wall thickness is for reference only
PERFORMANCE CHARACTERISTICS:
| TUBE O.D. | (MM) 6.4 to 15.9, (INCH) 1/4 to 5/8 |
| TUBE I.D. | (MM) 4 to 12.7, (INCH) 0.170 to 0.500 |
| TUBE WALL THICKNESS | (MM) 1 to 1.6, (INCH) 0.040 or 0.062 |
| MAXIMUM WORKING PRESSURE | (BAR) 4.8 to 145, (PSI) 6.2 to 125 |
| MINIMUM BURST PRESSURE | (BAR) 19.3 to 40, (PSI) 280 to 580 |
| MINIMUM BEND RADIUS | (MM) 25 to 101.6, (INCH) 1 to 4 |
| MAXIMUM WORKING TEMPERATURE | (C) 66, (F) 150, C) -62, (F) -80 |
| APPLICATION | Chemicals, Fluid Transfer, Pneumatic |
| MEDIA | Air, Potable Water, Water |
| COMPATIBLE FITTINGS | Dubl-Barb®, Prestomatic, SAE Cartridge, Flow Control, Prestolok, Liquifit, TrueSeal™, Compression, Compress-Align®, Poly-Tite, Hi-Duty, Fast & Tite, Prestomatic, Flow Control, Prestolok, Metru-Lok™ |
| TUBING MATERIAL | Polyethylene |
| STANDARD PACK QTY (FT) | 100, 500, or 1000 |
| STYLE | Smoothbore |
| INDUSTRY STANDARDS | FDA compliant, ASTM D-1693 (10% IGEPAL) for stress crack resistance, Conforms to ASTM D-1248, Type I, Class A, Category 4, Grade E5, NSF-51, NSF-61, FDA compliant, ASTM D-1693 (10% IGEPAL) for stress crack resistance, Conforms to ASTM D-1248, Type I, Clas |
| COLOR | Natural, Blue, Green, Gray, Orange, Purple, Red, White, Yellow, Black, Natural |
Parker
Neptune
SEKO - Beta Technology
Walchem
Beta Technology
Neptune
LMI
LMI
SeaMetrics
