PreClean (Eco-Green Series)

Cannon Water Technology Inc.

Q1,228.60 - Q6,016.72
(No reviews yet) Write a Review
SKU:
PreClean
Weight:
50.00 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

ECO-Green PreClean

Safe to use, Protects While It Cleans Closed Loops, Boilers and Cooling Systems

Product Description

  • Cleans while it protects closed hot and chill water loops, boilers and cooling towers.
  • Functions by penetrating and reducing surface tension of dirt, mud, oil and rust deposits so that these deposits can be flushed out of closed loops, boilers and cooling systems.
  • Helps remove dirt, oil, mill scale, rust and debris from new and old piping and heat exchanger surfaces.
  • NOT Compatible with aluminum. Use Sentinel X400 for systems containing aluminum.
  • Safe to use, environmentally friendly, can be flushed to sanitary sewers.
  • Can be used in cooling towers as a pre-cleaning agent to help lift and remove deposits that are difficult to reach and physically remove.
  • Mixes quickly in cold and hot water and is safer to use than TSP or caustic detergent cleaners.
  • Especially effective in new construction piping to help remove cutting oils and flux from new piping.  Not intended for use in potable domestic drinking water lines.
  • Non hazardous, can be UPS shipped in 5-gallon containers 

ECO-Green - PreClean Application Rate and Control Parameters

  • ECO-Green - PreClean should be fed at a rate of 2 - 5 liquid ounces per 100 gallons of water in systems that are lightly fouled.  For heavily fouled systems or new construction piping, use 12 ounces to 1-gallon per 100 gallons of water.
  • Feed by hand, bypass feeder or chemical pump into the re-circulating water and allow to circulation for 6 -24 hours.  After circulation thoroughly flush until the water is clear.  Take precautions in heavily fouled systems where large amounts of dirt, scale and deposits may plug screens, small lines and heat exchangers.
  • Heating the water will increase the cleaning action of ECO-Green - PreClean.  Keep temperatures below 180 degrees Fahrenheit.

Physical Properties: ECO-Green

Form:

Liquid

Color:

Light Amber

Odor:

Slight Aromatic

pH:

12+/-

Density:

9.09#/gallon

Specific Gravity:

1.09

Freeze Point:

Approximately 32° F

Freeze/Thaw Recovery:

Complete

Ship Class:

Non-Regulated Materials

 

 

Contains:

 

 

 

 HMIS Code

100C

 

 

Refer to the SDS for further health, safety and environmental information regarding this product. Information and recommendations in this bulletin are based on information believed to be reliable. However, the use of the product is beyond the control of Cannon Water Technology Inc. and no guarantee, expressed or implied, is made as to the effects of such the results to be obtained if not used in accordance with directions or established safe practice. The buyer must assume all responsibility, including injury or damage, resulting from misuse of the product as such, or in combination with other material.

ECO-Green – PreClean - Safe to use. Protects while it cleans closed loops, boilers and cooling systems.