The J41996 valve by Pulsafeeder is designed specifically for use in Pulsatron and Chem-Tech pumps. It is to replace the original injection check and back pressure valve on your existing unit. It includes a coupling nut for the 3/8" OD tubing connection fitting.
Materials: PVC, TFE Seals, Ceramic Ball
Compatible with:
Pulsatron pumps with wet end codes: VTC1, VTCD, VTCH, VTCJ, WTC1, WTCD
Chem-Tech Pump Injection Back Check Valve P/N J41714
PVC, Viton Seat, Ceramic Check Ball
Fits 1/2" OD Tubing
1/2" Process Connection
Used in the Chem-Tech Series 100/150...
Chem-Tech injection valves are designed to allow passage of chemical or water from the feed line into the process line. These valves are equipped with a check valve, which helps prevent the backflow...
Chem-Tech Series 100/150 pumps are manufactured to offer optimum performance, and extreme durability when metering chemical solutions at different outputs. These diaphragm-type metering pumps are...
J41694 Chem-Tech Injection Back Check Valve, PVC, Hypalon Seal, Ceramic Ball (1/2" OD Tubing X 1/2" MNPT)
The pumps used in most industrial applications use different types of valves for...
Pulsafeeder Chem-Tech Pump Degassing Head Assembly J60182 with Viton Valve Seats
Fits Pumps with 3/8" Tubing Connections.
if you would like the Diaphragm and head screws hardware, ...
Pulsafeeder Clear Vinyl Suction Tubing 4 Foot Length 3/8" OD.
Used for suction line or bleed valve return line.
Do not use this tubing for the discharge line as it is not intended for high pressure...
The SEKO Tekna Evo APG 800 line of chemical metering pumps have been designed for maximum chemical resistance and unmatched performance. SEKO standardized all of there pumps to include PVDF (Kynar)...
Pumps
Water Treatment Chemicals
Water Treatment Equipment
Solutions
