Unlike traditional water-driven medicators and proportioning systems, the Stennicator is designed to maintain reliable dosing performance without restricting water flow. Water quality issues, flow restrictions, and bypass conditions that can affect conventional water-driven systems are minimized. The system is also suitable for handling aggressive chemical solutions because the chemicals remain isolated within the peristaltic pump tube, suction line, and discharge line, preventing direct contact with the pump’s mechanical components.
The Stennicator delivers chemical directly into the water line at the 1:128 fixed injection ratio without creating an additional hydraulic restriction. Its peristaltic pumping technology provides self-priming operation and helps maintain prime when dosing gaseous solutions, supporting consistent chemical delivery across demanding applications.
With its pre-assembled configuration, fixed-ratio dosing, water-meter activation, and chemical isolation, the Econ Stennicator Meter System provides a practical solution for controlled chemical injection where dependable flow monitoring and simplified installation are required.
Specifications:
- Output Control: On/Off switch, fixed output
- Reproducibility: ±2%
- Maximum Working Pressure: 80 psi (5.5 bar)
- Maximum Operating Temperature: 104°F (40°C)
- Maximum Suction Lift: 25 ft (7.6 m) vertical lift, based on water
- Motor Type: 24VDC, brushless
- Shaft RPM (average maximum): 60
- Duty Cycle: Continuous
- Maximum Viscosity: 50 centipoise
- Motor Voltage: 120V 60 Hz (0.25A); 230V 60Hz (0.17A); 24VDC (0.85A)
- Power Cord Type: 120V 60 Hz, 230V 60Hz SJTOW; 24VDC pigtail
- Power Cord Length: 10 ft (3.05 m); 24VDCpigtail 1 ft (30.5 cm)
- Power Cord Plug End: 120V 60 Hz NEMA 5-15P; 230V 60Hz NEMA 6-15P; 24VDC pigtail
- Classification: Indoor/Outdoor