FLOW RATE OUTPUT CHART
25 psi (1.7 BAR) MAXIMUM
Approximate Maximum Output @ 50/60Hz
Item Number Prefix | Pump Tube Code | Roller Assembly | Gallons per Day | Gallons per Hour | Ounces per Hour | Ounces per Minute | Liters per Day | Liters per Hour | Milliliters per Hour | Milliliters per Minute |
SE10T1A | A | White | 2.5 | 0.10 | 13.2 | 0.22 | 9.5 | 0.39 | 396.0 | 6.60 |
SE10T2A | A | White | 5.0 | 0.21 | 26.4 | 0.44 | 18.9 | 0.79 | 786.0 | 13.10 |
SE10T2B | B | White | 8.5 | 0.35 | 45.6 | 0.76 | 32.2 | 1.34 | 1338.0 | 22.30 |
SE10T2C | C | White | 15.0 | 0.63 | 79.8 | 1.33 | 56.8 | 2.37 | 2364.0 | 39.40 |
80 psi (5.5 BAR) MAXIMUM
Approximate Maximum Output @ 50/60Hz
Item Number Prefix | Pump Tube Code | Roller Assembly | Gallons per Day | Gallons per Hour | Ounces per Hour | Ounces per Minute | Liters per Day | Liters per Hour | Milliliters per Hour | Milliliters per Minute |
SE10T1F | F | White | 0.6 | 0.02 | 3.0 | 0.05 | 2.2 | 0.09 | 90.0 | 1.50 |
SE10T2F | F | White | 1.3 | 0.05 | 6.6 | 0.11 | 4.8 | 0.20 | 198.0 | 3.30 |
SE20T4F | F | White | 3.4 | 0.14 | 18.0 | 0.30 | 13.1 | 0.54 | 544.8 | 9.08 |
SE20T4G | G | Black | 12.3 | 0.51 | 65.4 | 1.09 | 46.5 | 1.94 | 1937.4 | 32.29 |
SE20T4H | H | Black | 21.7 | 0.90 | 115.2 | 1.92 | 82.0 | 3.41 | 3416.4 | 56.94 |
FEATURES
• Programmable timer 24 hr/7 day, 24 event timer
• Enclosed housing
• Self-priming, does not lose prime or vapor lock
• Pumps off-gassing solutions and can run dry
• 3-point roller design assists with anti-siphon
• Tube replacement without tools
• Output reproducibility
• Tube lubrication not required
• Foot valve not required to prime
• Output volume not affected by back pressure
• Tubes and pump heads interchangeable between models
• Installation accessories included
SPECIFICATIONS
Flow Rate Output Control 24-hr programmable clock; 7 day, 24 event timer
Reproducibility ±5%
Maximum Working Pressure 25 psi (1.7 bar), 80 psi (5.5)
Maximum Operating Temperature 104°F (40°C)
Maximum Suction Lift 25 ft (7.6 m) vertical lift, based on water
Motor Type 24VDC, brushed
Shaft RPM (average maximum) 9, 18 or 40
Duty Cycle Continuous
Motor Voltage 120V 60Hz (0.25A), 230V 60Hz (0.17A),
230V 50Hz (10W), 24VDC (0.5A)
Power Cord Type 120V 60Hz, 230V 60Hz: SJTOW, 230V 50Hz: H05RN-F,
24VDC pigtail
Power Cord Plug End 120V 60Hz NEMA 5-15P,
230V 60Hz NEMA 6-15P, 230V 50Hz CEE7/7, 24VDC pigtail
Power Cord Length 6 ft (1.8 m), 10 ft (3.05 m) or
24VDC Pigtail 1 ft (30.5 cm)
Classification Indoor/Outdoor
MATERIALS OF CONSTRUCTION
All Housings Polycarbonate
Pump Tube & Check Valve Duckbill Santoprene®* (FDA approved)
Pump Head Rollers Polyethylene
Suction/Discharge Tubing, Ferrules Polyethylene (FDA approved)
Tube and Injection Fittings PVC or Polypropylene (both NSF listed)
Connecting Nuts PVC (NSF listed)
Suction Line Strainer and Cap
PVC or Polypropylene (both NSF listed); ceramic weight
All Fasteners Stainless steel
ACCESSORIES
3 Connecting nuts 1/4'
3 Ferrules 1/4'
1 Duckbill check valve 80 psi (5.5 bar) max.
OR 1 Injection fitting 25 psi (1.7 bar) max.
1 Weighted suction line strainer 1/4'
1 20' Roll suction/discharge tubing 1/4' white or black
OR 6 mm White Europe
1 Additional pump tube
1 Manual
* Santoprene® is a registered trademark of Exxon Mobil Corporation.