Pyxis UC-100A Touch Screen General Display & Data Logging Terminal

The Pyxis UC-100A is a microprocessor-based touch screen display and data logging terminal. It can connect to up to four Pyxis Lab® sensors via RS-485 Modbus. The UC-100A will be preconfigured by Pyxis Lab® based on the sensor(s) being utilized, please note that this may create delays in shipment! Our team pre-configuring the device will lead to rapid deployment upon arrival. The UC-100A provides live display and historical data trend charts for each sensor input. As well as a sensor calibration interface while logging data for all inputs via USB download, transmission via Modbus RTU and/or Modbus TCP.

The UC-100A may be installed as a stand-alone device or directly wired to any receiving controller, PLC or DCS Network. Users may also purchase the UC-100A with an integrated Pyxis Lab® CloudLink™ 4G LTE Gateway. With or without a prepaid global SIM card making the UC-100A a comprehensive data gateway to our Cloud data acquisition and service programs for live mobile visibility, data download and reporting. The UC-100A also comes equipped with two extra 4-20mA inputs and outputs. They can be used to log data from non-Pyxis analog devices.

Specifications

• Power: 110/220VAC 50/60 Hz, 30W
• Display: 7inch - 4 Wire Resistance Color Touch, 800 x 400 Resolution
• Output: 2 x 4-20 mA / RS-485 Modbus-RTU / Modbus TCP
• Input: 2 x 4-20 mA / RS-485 Modbus
• Relay: None
• Internet: RJ-45 socket, Modbus-TCP
• Data Storage: 4G, up to 1 million data entries or events
• USB: 1 x USB host, for data downloading and screen upgrade
• Dimension: 7.5 inch W x 12 inch L x 7.5 inch H
• Weight: 3 kg
• Operation Temperature: 32 – 122F
• Storage Temperature: 14 – 140F
• Humidity: 10 – 90% No Condensation
• Protection: IP65

Downloads

UC-100A Series Data Sheet