Lakos Purging Systems Parts and Accessories

EZ-Purge Automatic Drain Valve The EZ-Purge is used to automatically open a motorized ball valve or electric solenoid valve for a set amount of time from 1 to 60 seconds. Activation occurs each time power is applied to the interval timer. Typical...

3/4" Complete Ball Valve Assembly for AP-75-MBV, Valve Only (No Controller)      

3/4" CW Valve Repair Kit; including 2 seats, 2 body seals, 1 stem seal (reinforced Teflon), 1 thrust bearing (polyfill) and 2 Bellevilles

Lakos Visual Purge Kit  

Manual Purge Kit, 3/4",1-1/2"

  Lakos MBK-0510 Mounting Bracket Clamp Kit For H20-05, H20-10, SMP-05, SMP-10

    Lakos MBK-0510 Mounting Bracket Clamp Kit For H20-05, H20-10, SMP-05, SMP-10  

Lakos IKT-075-B Installation and Gauge Kit For Separators with a 3/4 inch purge outlet. Each IKT Kit contains (2) 160 psi (11.2 bar) glycerin-filled pressure gauges (2-1/2 inch diameter gauge face) with appropriate petcock valves, elbows and a...

Periodic purging of valves is mandatory in water and wastewater treatment plants. This purging may demand high maintenance and care when done manually. This is where Lakos AP-75-MBV 3/4" AccuPurge automatic valve can help. This is one of the important...

Lakos Automatic Purging System With Built In Repeating Timer Controller   Automatic purging of solids is easy to do with the Lakos CW-MBV Series of automated purging valves.   Purging solids from your filtration system can be accomplished by...

Lakos MBCK-062 Mounting Bracket Clamp Kit For ILB/ILS-0300 Lakos MBCK-062 Mounting Bracket Clamp Kit For (ILB/ILS-0300)

Lakos MBCK-052 Mounting Bracket Clamp Kit For ILB/ILS-0200, ILB/ILS-0250 Lakos MBCK-052 Mounting Bracket Clamp Kit For (ILB/ILS-0200, ILB/ILS-0250)