Stenner ECON FP Series Pumps

The Stenner Econ FP peristaltic pump is perfect for light-duty applications such as drinking water disinfection or pH adjustment for private water wells in homes or farms. In the animal health market such as poultry hatcheries, the Econ FP pump can inject nutrients or supplements into the drinking water or disinfect the water lines with the injection of acids, chlorine, or chlorine dioxide. The pump is also offered in 24VDC for installations.

Features:

  • Activated by dry contact or 12-24 VAC/VDC signal
  • Operates at a set time or speed
  • 10:1 turndown, 1% increments
  • Tube replacement without tools
  • Tank System or Meter System available
Sidebar Sidebar Sidebar
  • Stenner ECON FP Series Metering Pump

    Stenner

    Stenner ECON FP Series Metering Pump, E20PH, High Output, 80 PSI

    R5,968.51 - R7,339.87
    Brand New! Stenner Econ FP Series Peristaltic Pump. Multiple Control Features and Variable Speed.Multifunction All-In-One PumpThe Econ FP peristaltic metering pump has all the features found in a microprocessor-controlled system at a fraction of the cost...
    R5,968.51 - R7,339.87

    Quick Add
  • Stenner ECON FP Series Metering Pump

    Stenner

    Stenner ECON FP Series Metering Pump, E10PH, Low Output, 80 PSI

    R5,684.35 - R18,029.00
    Activated by a softener valve, water meter, flow switch or other flow activated equipment Accepts dry contact or 12-24 VAC/VDC signal Enclosed housing Self-priming, does not lose prime or vapor lock Pumps off-gassing solutions and can run dry...
    R5,684.35 - R18,029.00

    Quick Add
  • Stenner ECON FP Series Metering Pump

    Stenner

    Stenner ECON FP Series Metering Pump, E10PL, Ultra Low Output, 80 PSI

    R5,905.10 - R19,401.74
    Activated by a softener valve, water meter, flow switch or other flow activated equipment Accepts dry contact or 12-24 VAC/VDC signal Enclosed housing Self-priming, does not lose prime or vapor lock Pumps off-gassing solutions and can run dry...
    R5,905.10 - R19,401.74

    Quick Add
Compare 0

How Econ FP Peristaltic Pump Works?

The Stenner Econ FP pump is flow activated from a water meter, control valve, flow switch or from any control equipment that responds to flow. The pump accepts a dry contact or a 12-24 VAC/VDC signal and runs at a set time or a set speed according to the mode of operation selected. The control panel displays one of three operating modes, Seconds, Flow Switch, and Auxiliary and the percent setting for each. The functions are easy to program on the six-button control pad with a backlit LCD window. To assist against tampering, two buttons are required for operation and the keypad will automatically lock if it remains idle for one minute.