Blue-White
BW CFS-2 CHEM-FEED® Aluminum Simplex Skid System
No reviews yet
Write a Review
Write a Reviews
Blue-White
BW CFS-2 CHEM-FEED® Aluminum Simplex Skid System
SKU:
CFS-2
Weight:
70.00 LBS
Too many options to list. Call us for a quote
CFS-2
CHEM-FEED® Aluminum Duplex Skid System
The prefabricated design allows for easy installation, simply drop the Skid System in place and make your connections.
Technical Overview:
System Type: Duplex pump system
Product Compatibility: A1, A2, A3, A4, CD1, CD3, C2, C3
Frame Material: Powder coated aluminum
Mounting Position: Floor or Wall
PSI: 150
Bar: 8.6
Features
CHEM-FEED® Engineered Skid Systems were designed and engineered using solid modeling tools for superior piping installation and easy component maintenance.
Benefits:
- Efficient, Small footprint Design
- The prefabricated design allows for easy installation, simply drop the Skid System in place and make your connections.
- Each system is rigorously factory tested.
- Includes pressure switch option.
- Easy access to wiring components from the rear of the system.
- Joints use Weld-On 724 solvent cement which is chemically resistant to Sodium Hypochlorite and other chemicals.
- Dual side inlets enable connection of multiple skids to the same inlet.
- The Dual Skid is capable of simultaneous chemical injection of different or like chemical; or one pump can be used as a back-up pump sitting in standby.
- Available with the factory options, Custom modifications are not possible.
Specifications
Skid
- Chemically resistant polyester powder coated 6061 T6 aluminum. Welded joint construction.
Pump (sold separately)
- Flex-Pro model A3 or A4 peristaltic pumps or Chem-Pro model C2 or C3 diaphragm pump.
Piping
- PVC Schedule 80 (optional CPVC).
Tubing (T)
- Reinforced braided PVC, 200 Psi max, meets NSF std. 51. The pump inlet and outlet flexible tubing connections are terminated to half unions and secured to the barbed fitting with stainless steel clamps. The calibration cylinder fill
Tubing clamps
- 300 series SS band, 400 series SS screw
Unions (U)
- PVC body, schedule 80, FKM seals
Ball valves (V)
- Vented type ball, True unions, PVC body, PTFE shaft bearings and seats, FKM seals
Pressure Relief Valve (PRV)
- PVC body, PTFE primary diaphragm seal. Non-wetted components: FKM secondary seal, zinc plated steel spring, stainless steel external hardware, HDPE pressure adjusting screw and locknut. Infinite adjustment from 5- 100 psi. Maximum inlet pressure 150 psi.
Calibration Cylinder (CC)
- PVC body, PVC end caps, 1/4” ID tubing outlet vent.
- Available volumes: 1.6 GPH (100ml), 4 GPH (250ml), 8 GPH (500ml), 16 GPH (1000ml), 32 GPH (2000ml).
Pulsation Dampener (PD)
- CPVC body,10 cubic inch volume, FKM bladder (optional EPDM bladder)
Gauge w/guard (G)
- Gauge: liquid filled stainless steel with blowout plug, bottom mount, 1/4” NPT threads.
- Available pressure ranges: 0-30 psi, 0-100, psi, 0-200 psi.
- Guard: PVC body, FKM diaphragm seal, temperature compensated oil filled.
Check Valve (CV)
- PVC body, FKM diaphragm (optional EPDM). Cracking pressure: 1.0-1.5 psi.
- Maximum working pressure: inlet = 150 psi, back = 100 psi.
Flow Indicator (F)
- Machined cast acrylic, PVC connections, ceramic ball, polypropylene ball stop, PVC half unions, FKM seals (optional EPDM).
Y Strainer (S)
- PVC body, FKM seals (optional EPDM).
S6A Chemical Flowmeter (FVS)
- PVDF & PEEK body, PVC socket weld connections, FKM seals (optional EPDM). Available working flow ranges:
- 10-5,000 ml/min (0.158 – 79.2 GPH
- 100-10,000 ml/min (1.58 – 158.0 GPH)
Universal mounting blocks
- PVC
Pump extended mounting brackets
- 316 Stainless Steel
Skid mounting foot / wall pads
- 316 Stainless Steel
Mounting hardware
- 18-8 Stainless Steel
Drip Tray
- Polypropylene,16” x 21” x 3” – 4 gallons total containment
Maximum working pressure
- 125 psig (8.6 bar)
Operating Temperature
- 14 F to 115 F (-10 C to 46 C)
Approximate Shipping Weight (pump ships separately)
- Single Pump System: 60 lb. (27.2 Kg)
- Dual Pump System: 70 lb. (31.8 Kg)