Connection: 3/8" OD Tubing Body Material: PVD Seat Material: CSPE/ HYP Ball Material: Ceramic Includes: Ceramic Weight
J60717 is to be used with KHC1, VHC1 & VHC9 wet end pumps.
The Foot Valve and Strainer assembly is designed to be used at the end of your suction tubing for your Pulsatron Metering pump. After you have cut your suction tubing to the correct length, you will attach the Foot Valve / Strainer assembly to the end of the line. The benefits of a foot valve are to keep your metering pump primed after the unit is turned off due to the check ball located inside.
The Foot Valve and Strainer assembly also includes a ceramic weight which helps keep the line straight and held in place at the bottom of your tank. When installing the foot valve, make sure that it is not laying on it side and that it's hanging near the bottom of the tank that you're pumping out of. If the valve is laying on its side, it will not allow the check ball to function properly.
Chem-Tech Series 100/150 pumps are manufactured to offer optimum performance, and extreme durability when metering chemical solutions at different outputs. These diaphragm-type metering pumps are...
Chem-Tech / Mec-O-Matic Injection Back Check Valve Assembly This injection back check valve is used on the Mec-O-Matic and Chem-Tech XP series pumps. It fits 3/8" OD tubing and has a 1/4" male...