Eno Scientific Well Watch 670 Level Sensor

WELL WATCH 670

Integrating a water level indicator into your existing Telemetry/SCADA system has never been easier. The Well Watch 670 utilizes low frequency sound waves to provide continuosly updated, accurate levels from on top of the well. They can travel around 90 degree corners or coils of pipe allowing the freedom to install the Well Watch 670 at the most convenient location for that site.

• Complete data with easy acquisition
• No proprietary software or monthly fees
• Real time well levels (static, drawdown and recovery)
• Enables well management and control capabilities
• Comply with State and Local usage regulations
• Protect the investment in well and pump equipment
• Built in alarm capability in case of emergencies

he Well Watch eliminates the need to lower anything into the well, such as intrusive water tapes, bubblers or transducers. These methods open your well to contamination issues and tend to get stuck in the pump wiring resulting in an expensive, time consuming fix.

Each Well Watch can measure from 10 to 7000ft, no need for customized lengths. Apply in wells from 1/2″ up to 10″ in diameter with submersible pumps installed or just bare monitoring wells. For wells larger than 10″ we suggest stepping up to the commercial grade Well Watch 700.

The Well Watch 670 was designed for seemless telemetry connectivity through RS485 (Modbus), RS232, 4-20mA or 0-5V outputs. This ensures you the ability to communicate with your existing remote monitoring system or we can design a system for you, giving you the ability to view your well levels from any computer or iPhone. For stand alone applications, you can utilize the sensor’s built in data logger which is capable of storing 25 million time/date stamped log points.  The data is stored in a .txt format that can be viewed/graphed in a program of the user’s choice. Each unit can operate on AC/DC power or optional 10W or 30W solar panel kits for off grid or power sensitive applications.

MEASUREMENT:
Units – English (ft & in) or Metric
Resolution – .05 ft (1 cm)
Accuracy – .1 ft (3 cm)
Range – 10 to 7000 ft (3 to 2100M)
Update time – ~1 sec @ 500 ft (150M)

LOGGING:
Extended Memory – 2GB nonvolatile flash memory for 25 million data points
Automatic Logging Rates – 1 sec to 60 minutes per sample

POWER:
External Power – 6.5 to 12VDC at 80ma max.
Do not exceed 16V.
Real Time Clock – Li Ion 3V battery CR2032

ENVIRONMENTAL:
Temperature – -10 to 110 F (-20 to 45 C)
Humidity – 10 to 90% non-condensing

PHYSICAL:
Meter Dimensions – 8.25 x 3.5 x 3.5″
Probe Tip Dimensions – 1/2″, 3/4″ and 1″ MPT

FEATURES:
Display – 2 x 16 character LCD
Internal temperature compensation 

INPUT/OUTPUT:
RS232
RS485 (Modbus)
4-20mA output
0-5V Analog output
5V Alarm output
USB
Built-in wireless link for use with 310 Remote Display

Included with Well Watch 670 kit:

Well Watch Sensor

Clear Display Cover

Quick Start Guide

3 Nozzles, 1/2", 3/4", 1"

Microphone Extension Tube

A/C Power Adaptor

USB Cable

1 Year Warranty

See this link for product specification sheet download:

https://enoscientific.com/wp-content/uploads/2020/07/670-product-sheet-2019sm.pdf