ISOMAG MS5000 Electromagnetic Flow meter

ISOMAG MS5000 Electromagnetic Flow meter

The MS5000 Flowmeter combines reliable full-pipe flow measurement with high accuracy, low cost and ease of installation.

Several converters for control and interfacing are available for this flow sensor.

Features

• Low Cost
• Accuracy to +/-1%
• Three sizes for 1″, 2″ and 3″ Pipe Diameters.
• Flow ranges from 2.4 to 800 GPM.
• Standard pressure: 90 PSI.
• Fast clamp-on installation.
• Integral o-rings.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• Standard integral ground electrode.
• No moving parts for zero maintenance.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated.

Dimensions

Specifications

• Accuracy: ±1% of rate from 1 to 33 ft/sec.
• Repeatability: ±0.5%
• Temperature: Process: 32 to 122 °F
• Pressure: 90 PSI
• Lining Material: Polyurethane Rubber
• Body Material: Polyurethane Rubber
• Electrode Material: 316 S.S. (Hastelloy C, Titanium opt.)
• Number of Electrodes: 3 (2 Flow, 1 Ground)
• Environmental Rating: Compact Version - IP67 / NEMA 6
  Temporary Submersion Remote Version - IP68 / NEMA 6P -
  Extended Submersion (sensor)
• Fluid Conductivity: 5 μS/cm (min.)

Downloads

MS5000 Datasheet

MS5000 Operation Manual