ISOMAG MS600 Electromagnetic Flow Sensor

ISOMAG MS600 Electromagnetic Flow Sensor

The MS600 Flowmeter combines reliable full-pipe flow measurement with high accuracy, low cost and ease of installation.

Several converters for control and interfacing are available for this flow sensor.

Features

• Accuracy to +/-0.4%
• Low cost.
• Five sizes from 1/8″ to 3/4″ Pipe Diameters.
• Flow ranges from 0.03 to 50 GPM.
• Standard Pressure: 230 PSI.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• Standard integral ground electrode.
• No moving parts for zero maintenance.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated.Accuracy to +/-0.2%

Dimensions

Specifications

• Repeatability: ±0.2%
• Temperature: Process: 32 to 140 ºF
• Pressure: 230 PSI (higher pressures upon request)
• Liner Material: Polypropylene
• Body Material: Polypropylene
• Number of Electrodes: 3 (2 Flow, 1 Ground)
• Environmental Rating: NEMA 6 / IP67
• Fluid Conductivity: 5 μS/cm (min)
• Electrode Material: 316 S.S. (Hastelloy C, Titanium, Tantalum or Platinum are optional)

Downloads

MS600 Datasheet

MS600 Operation Manual