Lovibond MD 100 COD Tube Test Kit.Please note this instrument is supplied without reagents.
Contents:
Instrument in plastic case
Adapter for ø 16 mm cuvettes
4 micro batteries (AAA)
Syringe (1 ml)
Syringe (2 ml)
Instruction manual
Quick Start Guide
Certificate (COC)
Highlights:
Lightweight, rugged design for use in the field
Single unit construction with no parts to lose or break
Large, easy to read display
Industry specific parameter combinations available
The MD 100 COD is a dedicated, single parameter, instrument for COD Analysis. No need to purchase a multi-parameter colorimeter or spectrophotometer to get access to this critical waste water testing parameter!
The instrument utilizes Lovibond VARIO COD tube test reagents, which are available in three testing ranges. The reagents meet US EPA requirements for reporting purposes. Mercury-Free versions are also available for non-reporting purposes.
Description:
The MD 100 has several key features that make it a favorite among users.
Waterproof Design The IP 68 design of this instrument ensures that the MD 100 remains water tight for up to 1 hour at 0.1 meter. Don't worry about dropping the instrument into a body of water - it floats!
Accurate, Reproducible Results The optical system of the MD 100 utilizes LEDs and interference filters which quickly gives you results that you can be confident in.
User Calibration Mode A one-point calibration is possible. Additionally, all MD 100 instruments have the ability to display readings directly in ABS or %T units.
One-time-Zero Function Don't waste time waiting for your instrument to Zero after each test. When testing a new sample, zero the instrument once and all subsequent tests of that sample do not require you to re-zero the instrument.
Automatic Data Storage with Transfer Capabilities The MD 100 automatically stores the last 16 readings with time and date stamp. These results can be transferred to a spreadsheet using the IRiM accessory.
Ergonomic Design Whether you're using the MD 100 out in the field or in the lab, the design of the instrument makes it easy to handle and view the display. If you're using the instrument in the lab, the rubber feet on the bottom of the housing eliminates the need for two hand operation or to chase your instrument around the workbench.
Factory Programmed All MD 100 instruments are supplied ready to use with up to 14 calibration curves. All you need to do is select the test you need, prepare your sample and test!
Scroll Driven Menu System The simple interface allows you to quickly reach the test you need. When the instrument is turned on, it will automatically display the last test used.
2-Year Warranty
Technical Data:
Optics
LEDs, interference filters (IF) and photo sensor in transparent sample chamber. Depending on the version, up to 3 different interference filters are used. Wavelength specifications of interference filters: 430 nm Δλ = 5 nm 530 nm Δλ = 5 nm 560 nm Δλ = 5 nm 580 nm Δλ = 5 nm 610 nm Δλ = 6 nm 660 nm Δλ = 5 nm
Wavelength Accuracy
± 1
Photometric Range
-2600 - 2600 mAbs
Photometric Accuracy
3 % FS (T = 20 °C – 25 °C)
Operation
Foil keypad
Display
backlit LCD (on keypress)
Suitable Vials
Round Cuvettes 16 mm
Calibration
factory calibration and user calibration. Reset to factory calibration possible
LMI DC4500 Liquitron Conductivity Cooling Tower Controller
The LMI DC4500 Liquitron series conductivity controller is a microprocessor based cooling tower controller system that will operate...
Clearance ( NEW OLD STOCK ) - small scratch on screen
Brand New! The COM-80 is a reliable, economically priced, EC/TDS meter that is perfect for testing applications like...
Description:
The LS-200 is a general purpose ultrasonic liquid level sensor that replaces float, conductance and pressure sensors that fail due to contact with dirty, sticky and scaling liquids in...