Myron L CS50 Conductivity/TDS 100 psi @ 95°C, CPVC

These sensors are designed for use in general purpose applications up to approximately 20,000 µS/ppm, and provide
outstanding chemical resistance. Open front end geometry resists clogging and reduces maintenance requirements to a minimum.

Wetted materials of construction are CPVC or Teflon®*/Kynar®†, with 316 Stainless Steel electrodes as standard. The  option to select other metals as electrode materials provides an unequalled chemical resistance capability.

Dual O-ring seals of EPR increase sensor reliability and service life. The first O-ring absorbs the brunt of chemical attack, allowing the second O-ring to operate in a protected environment, and insure continued sealing.

Sensor constants 0.1 and 1.0 are available. The ranges that can be achieved with these sensors are dependent on the model and range of instrument — up to 20,000 µS/ppm is the normal maximum range of use.

Features

• Double threaded body can be used for either submersion or insertion.
• Dual O-ring seals used on all versions for high on-stream reliability.
• Superior chemical resistance

Specifications:

Maximum Pressure/Temperature Ratings:

CS50: 100 psi/6,9 bar at 95°C/203°F
CS60: 100 psi/6,9 bar at 120ºC/248°F

Temperature Compensation:  

10 KΩ @ 25ºC/77°F

RT100 & RT1000 available upon request.

Wetted Materials:
Insulator:

CS50: CPVC

CS60: Teflon®/Kynar®

O-rings           EPR

Electrodes      316 Stainless Steel standard, optional materials available upon request

Connections:

Process           1” NPT
Electrical         Plain tinned wire ends, 22-24 gauge.

Sensor Constant: