Myron L CS40 Valve insertable, Cond/TDS or Resistivity 100 psi @ 120°C

The Myron L Model CS40 sensor has been designed for a broad measurement range in difficult process conditions. It can be installed in submersion, insertion, or wet-tap configurations, and is good for most applications from high purity water to high chemical concentrations.

Wetted materials of construction are 316 stainless steel and Kel-F or Teflon®*, depending on the range of temperature required. All possible leak paths through the sensor are double sealed with EPR O-rings for maximum onstream reliability. The first O-ring protects the second O-ring from chemical attack, giving more than double the service life that can be expected from single sealed units.

Process connections are made via a bored through swage fitting with 3/4” NPT threads. This fitting can be screwed into a line, a tank, or the optional wet-tap valve (WTV) assembly. It can also be turned around and connected to a standpipe for use in a submersion configuration. Available sensor constants of 0.05, 0.1, 1.0 & 10.0 provide the broadest range of applications of any of our sensor models.

Features:

• Measures conductivity or resistivity directly in process temperatures up to 120ºC.
• Dual O-ring seals used on all versions for high on-stream reliability.
• Optional Wet-Tap Valve allows insertion and removal while line is under pressure.

Specifications:

Maximum Pressure/Temperature Ratings:

Standard Sensor: 100 psi/6,9 bar at 120°C/248°F
Hi Temp Sensor: Temporarily unavailable; contact manufacturer.

Valve Assembly: 50 psi/3,4 bar at all temps

Temperature Compensation:

Resistivity: 5.49 KΩ & 100 KΩ @ 25ºC/77°F
Conductivity: 10 KΩ @ 25ºC/77°F
Conductivity HT: 100 KΩ @ 25ºC/77°F
RT100 & RT1000 available upon request.

Wetted Materials:
Insulator: Teflon®
O-rings: EPR
Electrodes: 316 Stainless Steel standard; optional materials available upon request.
Fitting: 316 Stainless Steel

Connections: 3/4” NPT compatible with BSP

Process

Sensor: 3/4” NPT
Valve: 1” NPT

Electrical Plain tinned wire ends, 22-24 gauge

Sensor Constant: