Checkout securely with:
The RE-10 range extender is a useful accessory for testing high conductivity/ppm solutions beyond the normal range of your Ds meter (except 512T10). inserting the re-10 into a sample-filled cell cup increases the maximum range ten times. use the range extender whenever the reading is off the scale.
USING THE RE-10
1. Fill the cell cup three times to rinse it, but each time insert the range extender to rinse it also.
2. Fill the cell cup with your sample. push the range extender into the cell cup, seating the o-ring seal.
3. Use and read the Ds Meter in the normal manner. Multiply the reading by 10.
4. For best accuracy, repeat the complete test with a fresh sample.
5. when you're done testing, remove the range extender. Thoroughly rinse the cell cup and extender with clean water (preferably distilled or deionized) to eliminate dried salts build-up. This is extremely important when the instrument will be used to test high purity water.
Myron L
Myron L
Myron L
Myron L
Myron L
Myron L
Myron L
Myron L
