RCT 01217 Long Range Legacy Transmitter

Mounted in plastic NEMA 4X enclosures, the Long Range Legacy System is designed for outdoor/indoor industrial applications. Remote Control Technology also offers a one-year warranty for this system. The transmitter has an output power of 4 watts @ 26.995 MHz. The potential range is approximately 5 miles* and, with proper antenna application, is not limited to line-of-sight communication.

Includes:

• 6 Input, 4 Watt radio transmitter
• 15-watt power supply (110 VAC to 240 VAC input, 12 VDC output)
• 42” high-gain antenna
• Right-angle antenna mount
• 25’ coaxial cable w/ BNC connectors

Power Requirements:

• Supply Power: 12 VDC
• Power Supply Included
• XMIT Current: 200 mA
• STBY Current: 35 mA
• Solar Panel Kits: Turnkey, 12 VDC solar panel kits are available for locations without electricity.

Radio Output: 4 watts

• Range: 5 miles* potential
• Frequency: 26.995 FM
• Format: PDTFM FSK
• FCC Part 95 Subpart E compliance
• (no license required)

* The Range of all Radio products is dependent on local conditions and antenna selection and location.

Operation:

Operation is simple: connect a switch or any device with a dry contact closure to the transmitter inputs (terminal block). When a contact is closed, the transmitter will immediately send an “ON” transmission to the receiver, activating the selected relay output. The receiver relay outputs are rated at 6A up to 240VAC or 30VD. Immediately after a contact is opened, the transmitter will send an “OFF” transmission to the receiver, deactivating the receiver relay output and turning off the connected device.

Operating Environment

• Indoor or Outdoor
• -40 degrees F to 140 degrees F