GENERAL INFORMATION The PT35 digital counter-timer is designed to be used with Seametrics (or similar) meters and flow sensors that produce a pulse signal. It is typically used in water treatment and chemical dosing applications, most often in cooling towers and boilers. The PT35 serves as either a single or a dual timer, depending on whether one or both of its independent accumulators and timers are used. When the PT35 is used as a single timer, the accumulator counts the pulses coming from the meter. When a pre-set number of pulses has been reached, output power turns on for a set time, and then the cycle repeats. For applications requiring dual timers (typically, one chemical feed and one water bleed), both accumulators and timers are set to operate independently, even though input is from a single meter or flow sensor. A sequential function can be selected to lock one timer out while the other is operating. This prevents feed and bleed from occurring simultaneously. The PT35 can be used with dry contact meters, contacting- head meters with solid-state pickups (Seametrics MJE meters), or insertion flow sensors (Seametrics IP, TX, and EX series).
T5 Timer Controller AC Power T5 Timer Controller is an industrial production timer that allows you to automate processes in a competitive industrial environment. Included in a rugg
T4 Battery Powered Timer The T4 Battery Powered Digital Timer counts up or down from the time you set. When the cycle is completed, a very loud warbling buzzer sounds, and bright LED flash
Description: The MICROtron is a compact, four relay microprocessor-based controller with many standard features. MICROtron models are available to control conductivity and three selectable feed...
Plug into more options in water treatment control!Three powerful control outputs make the Walchem W100 a more versatile, high value choice among entry level water treatment controllers. The W100W...