FEATURES:
- Operational mode options: 4-20mA, 0-10VDC, dry contact, hall effect signals, cycle timer, 7 day/24 hour timer and manual
- Backup pump capability
- Standby input option to stop or start pump remotely
- Leak detection with dedicated output relay
- Modbus RTU over RS-485 capable (accessory required)
- Performance indicators with optional dry contact output relays
- Password protection
- Totally enclosed housing, NEMA 4X
- 2 year warranty
- Self-priming, does not lose prime or vapor lock
- Pumps off-gassing solutions and can run dry
- 3-point roller design assists with anti-siphon
- Simple tube replacement
- Output reproducibility
SPECIFICATIONS:
- Flow Rate Output Control: Varies per control mode; digital keypad
- Reproducibility: ±2%
- Maximum Working Pressure: 25 psi (1.7 bar), 100 psi (6.9 bar)
- Maximum Operating Temperature: 104°F (40°C)
- Maximum Suction Lift: 25 ft (7.6 m) vertical lift, based on water
- Motor Type: Brushless DC motor
- Shaft rpm: (average maximum) 45
- Duty Cycle: Continuous
- Maximum Viscosity: 1500 Centipoise
- Motor Voltage (Amp Draw): 120V 60Hz 1PH (0.6), 230V 50Hz 1PH (0.3)
- Hall Effect Max. Input Frequency: 100 KHz
- Pulse Duration Required: 10 milliseconds (Minimum duration required for pump to read signal.)
- Power Cord Type: 120V 60Hz SJTOWA, 230V 50Hz H05RN-F
- Power Cord Plug End: 120V 60Hz 5-15P, 230V 50Hz CEE7/7
- Power Cord Length: 6 ft (1.8 m)
- Classification: Indoor/Outdoor
STENNER S SERIES SPECIFICATIONS
S40 PERISTALTIC PUMP SPECIFICATIONS
