Stenner S10P Series

Stenner peristaltic metering pumps S10P flow activated variable speed

The S10P Series is a peristaltic metering pump activated by a water meter, control valve, flow switch or any control equipment that responds to water flow. The control equipment is wired to the pump input terminals to accept a dry contact or 12-24 VAC/VDC signal. The pump runs at a set time, a set speed or a set flow rate output according to the mode of operation selected. The flow rate outputs are up to 30 gallons per day at 100 psi maximum.

The control panel displays one of four operating modes, Seconds, Flow Switch, Auxiliary or 10 PPG and the percent setting for each. The functions are easy to program on the six-button control pad with a backlit LCD window. Two buttons are required for operation and the keypad will automatically lock if it remains idle for one minute.

Quick Facts

• Activated by a softener valve, water meter, flow switch or other flow activated equipment
• Accepts dry contact or 12-24 VAC/VDC signal
• Steady solution distribution with 10 PPG mode and 10 PPG dry contact water meter
• Leak detection with dedicated output relay
• Built-in dry contact signal repeater
• Accepts input from a fluid level device
• Totally enclosed housing
• 2 year warranty
• Self-priming, does not lose prime or vapor lock
• Pumps off-gassing solutions and can run dry
• 3-point roller design assists with anti-siphon
• Tube replacement without tools
• Output reproducibility

Flow Rate Outputs and Build an Item Number

S10P Flow Rate Outputs100 psi (6.9 bar) max

How to order Stenner Pump S10P

Stenner Pump S10P Series Overview